We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White round LED beacon light clear lens permanent mount 3 7/8 in diameter 4 7/8 in height IP67 rated 12-80V DC flashing 80 FPM

Ecco

Ecco 6262C Beacon Light Clear 12-80V DC 80 FPM 3 7/8 in Permanent

SKU CH-VVJG-CSPMH

A flashing LED beacon with a clear lens, SAE J845 Class 3 rating, IP67 sealing, and 12-80 V DC operation for permanent mounting

  • SAE J845 Class 3 rating meets regulatory visibility requirements
  • IP67 sealing protects against dust and water ingress
  • Wide 12-80V DC range suits many vehicle electrical systems
  • LED technology delivers 1.5 W efficiency with long service life
  • Permanent mount with blunt-cut wires simplifies installation

Ecco 6262C Beacon Light

The Ecco 6262C is a permanent-mount LED flashing beacon designed for universal vehicle fitment. It operates on a wide 12-80V DC range and meets SAE J845 Class 3 requirements for warning visibility. The clear lens emits white light at 80 flashes per minute for hazard marking.

Pre-installation checks

Verify that your vehicle electrical system supplies between 12 and 80 volts DC before wiring the blunt-cut leads. Confirm a flat mounting surface can accommodate the 3 7/8 inch diameter base and 4 7/8 inch overall height. The IP67 rating suits exposed exterior locations but does not protect against high-pressure washing.

Sustained operation

Continuous flashing at 1.5 watts produces minimal heat so the sealed housing maintains steady output during extended duty cycles. The LED light source avoids filament wear that degrades incandescent beacons over long shifts. IP67 sealing prevents moisture ingress that could interrupt operation in prolonged wet conditions.

Highlights

  • SAE J845 Class 3 rating meets regulatory visibility requirements
  • IP67 sealing protects against dust and water ingress
  • Wide 12-80V DC range suits many vehicle electrical systems
  • LED technology delivers 1.5 W efficiency with long service life
  • Permanent mount with blunt-cut wires simplifies installation

Specifications

BrandECCO

Questions about this item

What comes in the box with the Ecco 6262C beacon and what must be purchased separately?

The beacon includes blunt-cut wires for permanent mounting; a separate switch, fuse and suitable power cable are required to complete the installation.

Which SAE class rating applies to the 6262C and what does it indicate?

The light carries SAE J845 Class 3 rating, meaning it meets the minimum photometric requirements for warning lamps used on slow-moving or stationary vehicles.

What does the 80 FPM flash rate mean in daily use?

The beacon flashes 80 times per minute, providing a steady warning cadence that is visible in daylight and low-light conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.