We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal axial fan, 130 mm frame, five blades, die-cast aluminium housing

Ebm-Papst

Ebm-Papst No.W2S130-BM03-01 130mm 230V 46/47W case fan

SKU CH-SCM1-PEVT8 MPN No.W2S130-BM03-01

130 mm axial fan for 230 VAC mains, 46/47 W, 2700/3050 RPM, ball bearing, IP20, -25 to 70 °C

  • TypeAXIAL COOLING FAN
  • Runs at 2700/3050 RPM for strong airflow
  • Ball bearing motor for durable continuous operation
  • Operates from -25 to 70 °C ambient range
  • IP20 rated die-cast aluminium housing resists dust ingress
  • 130 mm axial fan fits standard case mounts

130mm 230V AC axial fan

The Ebm-Papst W2S130-BM03-01 is a 130mm axial fan built for 230VAC mains operation. It uses a shaded-pole motor with ball bearings and a five-blade steel impeller inside a die-cast aluminium housing. The unit weighs 1.1kg and carries an IP20 rating with Class B insulation. It suits industrial enclosures or specialist PC builds that can wire directly to mains voltage.

46/47W power draw at 2700/3050 RPM

At 50Hz the fan draws 46W and 0.27A while spinning at 2700 RPM; at 60Hz it draws 47W and 0.31A at 3050 RPM. This gives strong airflow for dense component stacks or high-heat loads, but the fixed mains voltage and 47W peak demand rule out standard motherboard headers or low-voltage fan controllers. Operation is guaranteed from -25°C to 70°C ambient.

Mains wired with ball-bearing durability

The fan terminates in bare leads for direct 230VAC connection, so the build must provide a fused mains circuit, suitable cable glands and finger guards to meet IP20 safety. The ball bearing motor and all-metal construction resist vibration and high ambient temperatures, freeing the installer from frequent bearing replacements common in sleeve-bearing alternatives. No PWM or speed-control interface is present.

Highlights

  • Runs at 2700/3050 RPM for strong airflow
  • Ball bearing motor for durable continuous operation
  • Operates from -25 to 70 °C ambient range
  • IP20 rated die-cast aluminium housing resists dust ingress
  • 130 mm axial fan fits standard case mounts

Specifications

BrandEbmpapst
ModelW2S130-BM03-01
TypeAXIAL COOLING FAN

Questions about this item

Will the 130 mm frame and 230 VAC supply fit my existing industrial chassis?

The fan measures 130 mm square with a die-cast aluminum housing and runs on 230 VAC 50/60 Hz, matching standard industrial cut-outs and mains voltage.

How can I confirm the fan is running at its rated 2700 or 3050 RPM after installation?

Measure the blade speed with a tachometer; at 50 Hz it should read 2700 RPM and at 60 Hz 3050 RPM while drawing 0.27 A or 0.31 A respectively.

Does the package include mounting hardware or a power lead, or must I source them separately?

The box contains only the fan unit (Fan*1); screws, guards and a mains cable are not supplied and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.