Ebm-Papst
Ebm-Papst Axial Fan Accessory 119 mm 209 CFM HAWA 4114NH4
Square axial fan accessory delivers 209 CFM airflow at 6,800 RPM with 24 V DC ball-bearing motor and IP20 rating
- weight1.26
- typeClosed Base
- materialHAWA
- 209 CFM airflow for strong cooling performance
- 24 V DC operation with 1.25 A draw
- Ball bearing design rated at 6800 RPM
- IP20 protection with electronic thermal protection
- Aluminium housing and fiberglass-reinforced blades for durability
Purpose and fit
The Ebm-Papst axial fan accessory is a square 119 mm unit rated at 209 CFM for 24 V DC systems. It suits engineers or technicians who need a compact closed-base fan with ball-bearing reliability for vertical or horizontal mounting.
Airflow at zero static pressure
The single figure that decides fit is 209 CFM measured at 0.000 in. SP; if your chassis or duct imposes measurable back-pressure the delivered airflow will be lower and you must verify the curve before specifying this part.
Sustained-load behaviour
At 6800 RPM the motor draws 30 W and 1.25 A while the electronic thermal protection guards against overtemperature up to a 149 °F ambient limit. Class E insulation and an IP20 housing mean the fan maintains rated speed continuously without derating in clean indoor environments.
Highlights
- 209 CFM airflow for strong cooling performance
- 24 V DC operation with 1.25 A draw
- Ball bearing design rated at 6800 RPM
- IP20 protection with electronic thermal protection
- Aluminium housing and fiberglass-reinforced blades for durability
Specifications
| Brand | EBM-PAPST |
|---|---|
| weight | 1.26 |
| type | Closed Base |
| material | HAWA |
Questions about this item
What does the 209 CFM rating mean once this fan is installed in a real machine?
It indicates the fan moves 209 cubic feet of air per minute at zero static pressure; actual airflow will drop once ducting, filters or grilles add resistance.
How does the 24V DC / 1.25 A electrical connection limit what power sources can be used?
The fan requires a 24 volt DC supply capable of at least 1.25 amps; lead-wire termination means you must solder or crimp a compatible connector.
What physical space and mounting pattern does the 119 mm square frame with 4 1/8 in centre holes need?
Allow a 119 mm square footprint, 1 1/2 in depth, and drill four holes on a 4 1/8 inch centre-to-centre grid for vertical or horizontal mounting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



