EBJ M-ONE Wireless XLR System One Drag Two
A wireless XLR system links two microphones or instruments to a mixer or PA up to 50 metres away with 107 dB signal-to-noise ratio and under 0.25 ms latency
- Output PowerOne drag two
- Power Consumption0.7 watt_hours
- Battery Time0.7 watt_hours, 3
- FeatureOne drag two
- Dimension72"
- Weight0.399 kilograms
- Wireless freedom up to 50 metres with UHF transmission
- 107 dB signal-to-noise ratio delivers clear audio at any volume
- 48 V phantom power supports condenser microphones directly
- 6 to 8 hours operation from built-in rechargeable lithium batteries
- 15 simultaneous systems on 20 channels for multi-mic setups
EBJ M-ONE Wireless XLR System
The EBJ M-ONE wireless XLR system replaces traditional microphone cables with a UHF wireless link. It supports one transmitter driving two receivers for flexible stage or venue setups. The system operates on the UHF band with uncompressed transmission and a signal-to-noise ratio of up to 107 dB for clear audio at any volume. Latency stays below .25 milliseconds across 20 available channels.
One Drag Two UHF Wireless Upgrade
This system upgrades wired dynamic, harmonic or battery-powered condenser microphones to wireless operation. It adds 48 V phantom power support for vocal condenser mics and a MUSIC mode for instrument recording. Up to 15 sets can run simultaneously in the same location without interference. The jump is worth it when cable runs are impractical and you need reliable wireless range up to 50 metres or 164 feet in open space.
XLR Transmitter Receiver Build Integration
The XLR transmitter and receiver connect directly to any dynamic or harmonic microphone, audio mixer or PA system. Three conversion modes — MIC, MUSIC and 48 V — adapt to the source without extra adapters. Built-in lithium batteries deliver 6 to 8 hours of operation and recharge for repeated use. Low battery power reduces transmission distance so plan charging around set length. The package weighs .399 kilograms and measures 72 inches for transport.
Highlights
- Wireless freedom up to 50 metres with UHF transmission
- 107 dB signal-to-noise ratio delivers clear audio at any volume
- 48 V phantom power supports condenser microphones directly
- 6 to 8 hours operation from built-in rechargeable lithium batteries
- 15 simultaneous systems on 20 channels for multi-mic setups
Specifications
| Brand | EBJ |
|---|---|
| Series | M-ONE |
| Model | M-ONE |
| Output Power | One drag two |
| Power Consumption | 0.7 watt_hours |
| Battery Time | 0.7 watt_hours, 3 |
| Feature | One drag two |
| Dimension | 72" |
| Weight | 0.399 kilograms |
| Package Contains | 1 |
| Sports Team | 1 Piece |
Questions about this item
What XLR connectors are needed to mount the transmitter and receiver on a microphone and mixer?
Both the transmitter and receiver use standard three-pin XLR connectors, so any dynamic, harmonic or battery-powered condenser microphone and any mixer or PA input with an XLR socket will connect directly.
How do I pair the transmitter and receiver, and which step is often missed?
Power both units on, press the channel button on the receiver until the desired channel number appears, then press the matching channel button on the transmitter; the step users miss is confirming both units show the same channel number before assuming they are linked.
When will the built-in lithium batteries need replacing, and what is the first sign?
The rechargeable lithium cells in both the transmitter and receiver deliver 6 to 8 hours per charge; the first sign of aging is a noticeable drop in transmission range well before the 50-metre open-air distance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Soundproof Store Wedge Acoustic Foam Panels Red 12 Pack
- Red
Soundproof Store Wedge Acoustic Foam Panels Purple 12 Pack
- Purple



