We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC control relay with screw terminals and DIN rail mounting

Eaton

Eaton XTRE10B22B IEC Control Relay 10 A 2NO/2NC 220/240 V AC

SKU CH-YC78-9TJQR

DIN-rail IEC control relay with 2NO/2NC contacts rated 10 A at 240 V AC and 220/240 V AC coil

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Handles 10 A AC loads with 2NO/2NC contacts
  • Coil operates at 220/240 V AC for standard supplies
  • 3 VA consumption keeps panel heat low
  • DIN-rail mount in 45 mm frame saves space
  • IP20 rating protects against finger contact

IEC Control Relay for Industrial Automation

The Eaton XTRE10B22B is a 10 A IEC control relay designed for industrial electrical automation systems. It operates on a 220/240 V AC coil voltage at 50/60 Hz and provides a 2NO/2NC contact configuration. The unit mounts on a standard DIN rail within a 45 mm frame and carries an IP20 rating.

Screw Terminal Wiring and DIN Rail Mounting

Electrical connections use screw terminals for secure conductor attachment in control panels. The relay body measures 1.77 in wide, 2 in high and 2.97 in deep, fitting standard DIN rail profiles. Power consumption is rated at 3.3 VA, and the transparent housing allows visual inspection of contact status.

Contact Ratings Define Switching Limits

AC switching is rated at 6 A at 240 V, while DC switching handles 10 A at 24 V. The maximum operating temperature reaches 140 degrees F, setting a thermal boundary for enclosure design. The relay is compatible only with the XTRE series, so it cannot be mixed with other relay families.

Highlights

  • Handles 10 A AC loads with 2NO/2NC contacts
  • Coil operates at 220/240 V AC for standard supplies
  • 3 VA consumption keeps panel heat low
  • DIN-rail mount in 45 mm frame saves space
  • IP20 rating protects against finger contact

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Will the screw-terminal contacts need periodic retightening after installation?

The relay uses screw terminals for wiring; standard practice is to check terminal torque after initial energising and during scheduled panel maintenance.

What contact rating limits continuous load on the 2NO/2NC poles?

AC contacts are rated 6 A at 240 V and DC contacts 10 A at 24 V; neither value should be exceeded during sustained operation.

How much heat does the 3.3 VA coil add inside a closed cabinet running all day?

The coil draws 3.3 VA at 220/240 V AC, 50/60 Hz, and the unit is rated to 140 °F maximum ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.