We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent Eaton front auxiliary contact block with screw clamp terminals

Eaton

Eaton XTMCXFA22 Front Auxiliary Contact 2NO/2NC 10A 600V AC

SKU CH-DE64-C3YQR

Front-mount auxiliary contact block adds two normally open and two normally closed poles rated 10 A at 600 V AC for XTRM miniature control relays

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Front-mounted auxiliary contact adds four switching poles to compatible XTRM relays
  • Two normally-open and two normally-closed contacts handle 10 A at 600 V AC
  • Screw-clamp terminals give secure wiring without special tools
  • Transparent housing lets you verify contact status at a glance
  • Designed for Eaton XTRM miniature control relay series

Eaton Front Auxiliary Contact 2NO/2NC

This Eaton XTMCXFA22 auxiliary contact mounts on the front of XTRM miniature control relays. It provides four screw-clamp terminals rated for 10 A at 600V AC. The unit adds two normally open and two normally closed contacts to expand control-circuit functionality. Transparent housing allows visual inspection of contact status.

Suitable Applications and Limits

Panel builders wiring motor starters or lighting contactors will find the front-mount format convenient. The 10 A rating suits typical pilot-duty and small-load switching. Installations requiring higher current capacity or a different pole configuration should select another device.

Deciding Specification

The 600V AC maximum voltage rating determines whether this contact block matches your control-circuit voltage. Verify your system voltage against this figure before purchase.

Highlights

  • Front-mounted auxiliary contact adds four switching poles to compatible XTRM relays
  • Two normally-open and two normally-closed contacts handle 10 A at 600 V AC
  • Screw-clamp terminals give secure wiring without special tools
  • Transparent housing lets you verify contact status at a glance
  • Designed for Eaton XTRM miniature control relay series

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Does the 10 A contact rating generate noticeable heat when the auxiliary contact runs continuously?

The contact is rated for 10 A at 600 V AC; heat rise depends on the actual load current and the enclosure ventilation, so keep the operating current within the rated value.

What existing hardware must I already have to mount and use this front auxiliary contact?

It is designed for front mounting on Eaton XTRM miniature control relays and uses screw clamp terminals for wiring.

Will this auxiliary contact work with older Eaton control relays that are not part of the XTRM series?

The manufacturer specifies compatibility with the XTRM miniature control relay series; use with other series is not confirmed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.