We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact transparent contactor with DIN rail mounting, screw terminals, 1.77 in wide, 2.28 in high

Eaton

Eaton XTMC9A10C IEC Miniature Magnetic Contactor 480V AC 3P 9A 1NO

SKU CH-3GS1-R4SKE

Miniature IEC magnetic contactor rated 9 A inductive at 480 V AC, three-pole with one normally-open auxiliary contact and screw-terminal DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated contactor handles 9 A inductive loads
  • 1NO auxiliary contact enables control-circuit feedback
  • 415/480 V AC coil suits industrial supplies
  • DIN-rail or panel mount fits tight cabinets
  • Screw terminals give secure wiring connections

Compact 9 A IEC Contactor for DIN Rail Panels

The Eaton XTMC9A10C is a miniature IEC magnetic contactor rated for 9 A inductive and 20 A resistive loads at 480 V AC. It fits Frame Size A and mounts on standard DIN rails or directly on panels, making it suitable for control circuits in industrial automation cabinets.

Screw Terminals and Simple DIN Rail Mounting

Installation uses screw terminals for secure wiring and the contactor snaps onto DIN rail or bolts to a panel without special tools. The non-reversing, three-pole design with a single 1NO auxiliary contact keeps the wiring straightforward, but verify coil voltage matches your control supply before energising.

Verify Coil Voltage and Enclosure Requirements

The coil operates at 415/480 V AC, so confirm your control circuit provides this exact voltage. The unit carries no NEMA enclosure rating, so it must be installed inside a suitable protective enclosure. Ensure the 2.28 in height and 1.77 in width fit your panel layout and that the 9 A inductive rating meets the load demand.

Highlights

  • IEC-rated contactor handles 9 A inductive loads
  • 1NO auxiliary contact enables control-circuit feedback
  • 415/480 V AC coil suits industrial supplies
  • DIN-rail or panel mount fits tight cabinets
  • Screw terminals give secure wiring connections

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How can I verify the contactor is operating correctly after wiring it to the 480V AC coil?

After applying 415/480V AC to the coil, the three main poles should close and the 1NO auxiliary contact should change state, allowing a control circuit to signal the contactor is energised.

What components are included with the contactor and what must be sourced separately?

The unit ships with the IEC miniature magnetic contactor frame size A, screw terminals and DIN rail or panel mounting capability; DIN rail, panel hardware and control wiring are not included.

Which coil voltage version should I select for a 480V AC control circuit?

Choose the 415/480V AC coil version listed, as it matches the 480V AC control supply and provides the 9 A inductive, 20 A resistive rating for three-pole switching.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.