We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCR009B21A reversing contactor, transparent housing, DIN rail mount, screw terminals

Eaton

Eaton XTCR009B21A 3-Pole 120V AC 9A Reversing Contactor

SKU CH-7YYK-C1BZG

Three-pole IEC reversing contactor rated 9 A inductive at 110/120 V AC with screw terminals and DIN-rail or panel mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reversing capability simplifies motor direction control
  • 9 A inductive rating handles typical industrial loads
  • 120 V AC coil matches common control voltages
  • Screw terminals enable secure field wiring
  • DIN rail and panel mounting fits standard enclosures

Eaton XTCR009B21A Reversing Contactor

The Eaton XTCR009B21A is a three-pole IEC magnetic contactor rated for 9 A inductive and 22 A resistive loads at 120 V AC. It provides reversing capability for motor control applications in industrial automation panels. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring. It is suited for electricians and panel builders assembling motor starters or reversing circuits.

Sustained load behaviour

With a 9 A inductive full-load rating and 3 hp at 240 V AC three-phase, the contactor handles continuous motor starting and stopping without exceeding its thermal limits. The coil operates at 110/120 V AC for reliable actuation during extended duty cycles. Four auxiliary contacts (2NO) support interlocking and status feedback in control circuits. The frame size B construction maintains consistent performance under repeated reversing operations.

Pre-installation checks

Verify that your control circuit supplies 110/120 V AC to match the coil voltage. Confirm the available DIN rail or panel space accommodates the 4 in height and 5.5 in width dimensions. Ensure the motor's full-load current does not exceed 9 A inductive or 22 A resistive ratings. Check that screw terminal wire gauges suit your installation requirements.

Highlights

  • Reversing capability simplifies motor direction control
  • 9 A inductive rating handles typical industrial loads
  • 120 V AC coil matches common control voltages
  • Screw terminals enable secure field wiring
  • DIN rail and panel mounting fits standard enclosures

Specifications

BrandEaton
ModelXTCR009B21A
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Does the 9 A reversing contactor run silently on a DIN rail all day?

The IEC contactor uses a 110/120 V AC coil and screw terminals; it has no fan, so audible noise is limited to the magnetic pull-in and drop-out clicks during each reversal.

What auxiliary wiring must I already have to use the four built-in auxiliary contacts?

The unit provides 2 NO auxiliary contacts rated for the same 120 V AC coil voltage; you need matching control-circuit wiring and a 120 V AC supply to drive the coil.

Will the 3 hp at 240 V AC rating work with my existing 3-pole motor starter?

The contactor is rated 3 hp three-phase at 240 V AC and 9 A inductive; it mounts on DIN rail or panel and uses screw terminals compatible with standard motor-starter wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.