Eaton
Eaton XTCF063D00C IEC Magnetic Contactor 480V AC 4P 63A
A 4-pole IEC magnetic contactor rated for 480 V AC with 63 A resistive and 40 A inductive capacity, DIN-rail or panel mountable, screw terminals, no auxiliary contacts
- Handles 63 A resistive loads with 4-pole IEC design
- Coil operates at 415/480 V AC for industrial control panels
- Compact 3.54 in height fits tight DIN rail spaces
- Screw terminals give secure connections without auxiliary contacts
- Non-reversing contactor rated 40 A inductive for motor circuits
Eaton XTCF063D00C Contactor Application
The Eaton XTCF063D00C is a four-pole IEC magnetic contactor rated for 480V AC coil operation. It handles inductive loads up to 40 A and resistive loads up to 63 A without auxiliary contacts included. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring connections.
Replacing Lower-Rated Contactors
This contactor replaces devices with lower current ratings or fewer poles when the application demands 63 A resistive switching capacity. The jump is worth it when existing hardware cannot manage the full load current or when a 415/480V AC coil voltage matches the control circuit supply. Non-reversing design suits straightforward motor starting or isolation tasks.
Sustained Load Behaviour
Under continuous operation the contactor maintains rated current through its Frame Size D construction with screw terminal connections. The 3.54 in height and 5.75 in width fit standard panel layouts while the IEC form factor ensures consistent performance during extended duty cycles. No enclosure rating means the installer must provide appropriate environmental protection for the operating conditions.
Highlights
- Handles 63 A resistive loads with 4-pole IEC design
- Coil operates at 415/480 V AC for industrial control panels
- Compact 3.54 in height fits tight DIN rail spaces
- Screw terminals give secure connections without auxiliary contacts
- Non-reversing contactor rated 40 A inductive for motor circuits
Specifications
| Brand | EATON |
|---|
Questions about this item
What are the height and width dimensions for the D-frame contactor?
The unit measures 3.54 inches in overall height and 5.75 inches in overall width.
How is the contactor mounted and which step is often missed?
It mounts on DIN rail or panel; the step often missed is verifying the coil voltage matches the 415/480V AC supply before wiring.
What is the inductive full-load current rating that determines contact wear?
The inductive full-load current rating is 40 A, which governs contact life under motor loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
