We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey IEC magnetic contactor, rectangular block with terminal screws, 2.28 by 2.28 by 3.83 inches

Eaton

Eaton XTCF045C10TD IEC Magnetic Contactor 4 Poles 24V DC 25A

SKU CH-NXFG-7A2KB

Four-pole IEC contactor switches 25 A inductive loads at 24 V DC with 1NO auxiliary contact

  • Type3" Harsh Environment, Hook-and-Loop Closure
  • 25 A inductive rating handles motor loads
  • 45 A resistive rating supports heating circuits
  • 24 V DC coil enables low-voltage control
  • 4-pole configuration switches three-phase plus neutral
  • UL, CE, CSA, CCC, ATEX and IEC 60947 compliance

Eaton XTCF045C10TD 4-Pole Contactor

The Eaton XTCF045C10TD is a four-pole IEC magnetic contactor rated for 25 A inductive and 45 A resistive loads. It operates on a 24 V DC coil and includes one normally open auxiliary contact. This device suits industrial motor control and power switching panels.

Verify coil voltage and load ratings

Before ordering, confirm that your control circuit supplies 24 V DC to match the coil rating. Ensure the connected load does not exceed 25 A inductive or 45 A resistive current. Check that the 4.500 frame size and 2.28 in by 3.83 in footprint fit your panel layout.

Sustained operation within rated limits

Under continuous duty the contactor handles its full 25 A inductive rating across voltages up to 575 V AC. The open-frame design relies on ambient airflow for cooling during extended runs. Performance remains stable at the listed horsepower ratings for 208 V, 240 V, 480 V and 575 V three-phase motors.

Highlights

  • 25 A inductive rating handles motor loads
  • 45 A resistive rating supports heating circuits
  • 24 V DC coil enables low-voltage control
  • 4-pole configuration switches three-phase plus neutral
  • UL, CE, CSA, CCC, ATEX and IEC 60947 compliance

Specifications

BrandEaton
ModelXTCF045C10TD
Type3" Harsh Environment, Hook-and-Loop Closure

Questions about this item

What comes in the box with the XTCF045C10TD contactor and do I need to buy a coil or enclosure separately?

The contactor is supplied as a complete unit with its 24 V DC coil already fitted and no enclosure included; no extra coil or enclosure is required unless your installation demands one.

Should I select this 25 A inductive / 45 A resistive model or a higher-frame version for my motor load?

Choose this Frame C unit when your motor full-load current is 25 A inductive or 45 A resistive or less; for larger motors you would need a higher-frame contactor.

What does the 25 A inductive rating mean when the contactor is controlling a 240 V three-phase motor?

At 240 V three-phase the 25 A inductive rating corresponds to a 10 hp motor load, so the contactor can start and run motors up to that size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.