We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor with screw terminals, DIN rail mount, 3.35 by 2.28 inches

Eaton

Eaton XTCF045C10A Magnetic Contactor 120V AC 4P Non-Reversing 25A 45A

SKU CH-TW5N-CZ6F9

Four-pole IEC magnetic contactor with 120 V AC coil, 25 A inductive and 45 A resistive ratings, DIN-rail or panel mount, screw terminals

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated contactor for reliable motor switching
  • 120 V AC coil voltage matches standard control circuits
  • Four-pole non-reversing design handles three-phase loads
  • 25 A inductive / 45 A resistive current ratings suit varied applications
  • Compact 3.35 in height fits tight DIN-rail panels

IEC Magnetic Contactor for 120V Control Circuits

The Eaton XTCF045C10A is a four-pole IEC magnetic contactor built for 110/120V AC coil operation. It mounts on DIN rail or panel and uses screw terminals for secure wiring in industrial control panels.

Resistive and Inductive Load Limits

The contactor carries 45 A resistive and 25 A inductive full-load current at the rated voltage. These two figures define the practical ceiling for heater banks, lighting loads and motor-starting duty on a single device.

Non-Reversing Four-Pole Configuration

The unit provides four main poles plus one normally-open auxiliary contact in a non-reversing frame. Choose this model only when the application does not require motor reversal or a second contactor for forward/reverse logic.

Highlights

  • IEC-rated contactor for reliable motor switching
  • 120 V AC coil voltage matches standard control circuits
  • Four-pole non-reversing design handles three-phase loads
  • 25 A inductive / 45 A resistive current ratings suit varied applications
  • Compact 3.35 in height fits tight DIN-rail panels

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I select this 4-pole 25 A inductive / 45 A resistive contactor or a different frame size for my load?

Choose this XT frame C unit when the inductive load is up to 25 A and the resistive load up to 45 A; the 4-pole arrangement and 1 NO auxiliary suit circuits needing three power poles plus one auxiliary.

What does the 25 A inductive rating mean once the contactor is installed in a panel?

It means the contactor can switch a 25 A inductive load such as a motor or transformer at 110/120 V AC coil voltage without exceeding its thermal limits.

The screw-terminal IEC contactor mounts on DIN rail — what control voltage does it actually require?

The coil operates on 110/120 V AC, so the control circuit must supply that voltage for reliable pull-in and drop-out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.