We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor, 2.17 in wide, 4.09 in high, DIN rail mount, screw terminals

Eaton

Eaton XTCE065D00B Magnetic Contactor 220/240V AC 3P 65A

SKU CH-C78Y-GN6Z5

IEC magnetic contactor for 220/240 V AC three-phase circuits, 65 A inductive and 98 A resistive, DIN-rail or panel mount with screw terminals

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Controls motors up to 65 A inductive load
  • Handles 98 A resistive current for heating circuits
  • Operates on 220/240 V AC coil voltage
  • Three-pole IEC design for three-phase switching
  • Mounts on DIN rail or panel with screw terminals

Eaton XTCE065D00B Magnetic Contactor

The Eaton XTCE065D00B is a three-pole IEC magnetic contactor rated for 65 A inductive and 98 A resistive loads. It operates on a 220/240V AC coil voltage and mounts on DIN rail or panel. The unit has no auxiliary contacts included.

Industrial control panels needing 65 A switching

This contactor suits panels that require non-reversing three-phase motor or load switching at 65 A inductive current. It is not for applications needing built-in auxiliary contacts, reversing capability, or an integrated enclosure.

65 A inductive and 98 A resistive capacity

The contactor comfortably handles inductive loads up to 65 A and resistive loads up to 98 A. It runs out when the load exceeds these ratings or when auxiliary contact functions are required.

Highlights

  • Controls motors up to 65 A inductive load
  • Handles 98 A resistive current for heating circuits
  • Operates on 220/240 V AC coil voltage
  • Three-pole IEC design for three-phase switching
  • Mounts on DIN rail or panel with screw terminals

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What auxiliary contacts must I already have to complete the installation?

This contactor includes zero auxiliary contacts, so any normally open or normally closed blocks required for your control circuit must be purchased separately and mounted on the side of the frame.

Will my existing DIN rail and panel cut-outs accept the 4.09 in height and 2.17 in width?

The unit is designed for both DIN rail and panel mounting with a frame size D footprint of 4.09 inches high by 2.17 inches wide, matching standard IEC rail spacing and common panel drill patterns.

How can I verify the coil is energising correctly at 220/240V AC?

Measure the coil terminals with a multimeter set to AC voltage; a reading between 220 and 240 volts confirms the coil is receiving the rated supply and the main poles should close.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.