We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor with screw terminals, DIN rail mounting, 2.25 by 4.57 inches

Eaton

Eaton XTCE050D00C IEC Magnetic Contactor 480V AC 3P 50A video accessory

SKU CH-25E9-40YV8

A 480 V AC three-pole IEC contactor rated 50 A inductive and 80 A resistive with screw terminals and DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC magnetic contactor rated for 480 V AC three-phase circuits
  • Handles 50 A inductive and 80 A resistive full-load currents
  • Coil operates at 415/480 V AC for standard industrial supplies
  • Compact 2.25 in height by 4.57 in width fits tight panels
  • Mounts on DIN rail or panel with screw-terminal connections

Industrial Motor Starter

The Eaton XTCE050D00C is an IEC magnetic contactor built for three-phase motor control. It carries a 50 A inductive and 80 A resistive rating at 480 V AC with a 415/480 V AC coil. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring in industrial automation panels.

Suited For Three-Phase Switching

This contactor suits engineers wiring non-reversing three-pole motor circuits up to 50 A inductive load. It is not for applications needing built-in auxiliary contacts, a reversing starter or an enclosed NEMA-rated housing. Buyers who require integrated control contacts or a sealed enclosure should specify a different assembly.

Zero Auxiliary Contacts Included

The package ships with no auxiliary contact blocks, so status feedback or interlock circuits must be sourced separately. Screw-terminal connections and the open-frame design mean the installer provides all wiring accessories and any required enclosure. No software or configuration tools are bundled with this hardware.

Highlights

  • IEC magnetic contactor rated for 480 V AC three-phase circuits
  • Handles 50 A inductive and 80 A resistive full-load currents
  • Coil operates at 415/480 V AC for standard industrial supplies
  • Compact 2.25 in height by 4.57 in width fits tight panels
  • Mounts on DIN rail or panel with screw-terminal connections

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What power supply do I need for the 415/480V AC coil on this contactor?

You must provide a 415 V AC or 480 V AC control voltage that matches the coil rating; the coil will not operate on lower or DC voltages.

Can I use this non-reversing contactor in a circuit that already has a reversing starter?

This unit is non-reversing only; it cannot replace or work inside a reversing starter because it lacks the second contactor and mechanical interlock required for forward/reverse operation.

How do I confirm the main poles are carrying the rated 50 A inductive load after installation?

Measure current through each of the three screw-terminal poles with a calibrated clamp meter while the load runs; readings should not exceed 50 A inductive or 80 A resistive per pole.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.