We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE050D00B contactor transparent housing DIN rail mount

Eaton

Eaton XTCE050D00B IEC Magnetic Contactor 3 Pole 240V 50A

SKU CH-54YB-SW66S

Three-pole IEC contactor rated for 50 A inductive and 80 A resistive loads at 220/240 V AC coil voltage

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated contactor handles 50 A inductive loads
  • Resistive switching capacity reaches 80 A for heating circuits
  • 220/240 V AC coil suits standard control voltages
  • Three-pole design switches three-phase motors directly
  • Screw terminals and DIN-rail mounting simplify panel wiring

3-Pole IEC Contactor for 50 A Inductive Loads

The Eaton XTCE050D00B is a three-pole IEC magnetic contactor rated for 50 A inductive and 80 A resistive current at 220/240 V AC. It mounts on DIN rail or panel using screw terminals and carries no auxiliary contacts. The transparent frame D housing measures 3.5 in high by 4 in wide.

Replaces worn IEC contactors in motor-starter panels

This unit suits panels where the existing contactor has failed or where a non-reversing 50 A inductive rating is required. The jump is worth it when the current contactor shows coil burnout, contact welding or when the enclosure lacks a NEMA rating and an open-frame IEC device is specified.

Verify coil voltage, mounting space

Confirm the control circuit supplies 220/240 V AC to match the coil. Ensure 3.5 in of vertical and 4 in of horizontal clearance on the DIN rail or panel. Check that screw-terminal wiring reaches the contactor without strain and that no auxiliary contacts are needed for the control scheme.

Highlights

  • IEC-rated contactor handles 50 A inductive loads
  • Resistive switching capacity reaches 80 A for heating circuits
  • 220/240 V AC coil suits standard control voltages
  • Three-pole design switches three-phase motors directly
  • Screw terminals and DIN-rail mounting simplify panel wiring

Specifications

BrandEaton
ModelXTCE050D00B
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What DIN rail or panel dimensions does the 3.5 in by 4 in frame size D contactor require for mounting?

The contactor measures 3.5 in height by 4 in width and mounts on standard DIN rail or directly to a panel using its frame size D footprint.

How do you wire the 220/240V AC coil and 50 A inductive main terminals, and what step is often missed?

Connect the coil to 220/240V AC and the three main poles via screw terminals; the step often missed is confirming the coil voltage matches the control supply before energising.

When should the auxiliary contact block be added to this zero-auxiliary-contact IEC contactor?

Add an auxiliary contact block whenever the control circuit requires status feedback, since the base unit ships with 0 auxiliary contacts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.