We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular contactor with transparent housing, DIN rail mounting, screw terminals, 3.9 by 1.85 inches

Eaton

Eaton XTCE032C10E Magnetic Contactor 208V AC 3P 32A 1NO

SKU CH-19HK-KD02M

IEC magnetic contactor rated 32 A inductive and 45 A resistive at 208 V AC with three poles, one normally-open auxiliary contact, screw terminals and DIN-rail or panel mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor switching with 32 A inductive rating
  • Compact 3.9 × 1.85 in frame fits tight panels
  • Flexible DIN-rail or panel mounting simplifies installation
  • Standard 208 V AC coil matches common supplies
  • Built-in 1 NO auxiliary contact enables status feedback

Eaton XTCE032C10E 32 A Contactor

This Eaton XTCE032C10E is a three-pole IEC magnetic contactor rated for 32 A inductive and 45 A resistive loads. It operates from a 208 V AC coil and provides one normally-open auxiliary contact for control circuits. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring.

For Motor Starters And Lighting Panels

Electrical contractors and panel builders switching three-phase motors, resistive heaters or lighting circuits at 32 A will find this contactor suitable. The compact frame size C fits standard DIN rails and the transparent housing allows visual inspection. Installations requiring reversing operation, a different coil voltage or a built-in enclosure must select another product.

32 A Inductive Current Rating

The 32 A inductive full-load current is the primary figure that determines whether this contactor matches the load. Exceeding this rating risks contact welding and premature failure. Verify the connected motor or heater nameplate current against the 32 A value before specifying this part.

Highlights

  • Reliable motor switching with 32 A inductive rating
  • Compact 3.9 × 1.85 in frame fits tight panels
  • Flexible DIN-rail or panel mounting simplifies installation
  • Standard 208 V AC coil matches common supplies
  • Built-in 1 NO auxiliary contact enables status feedback

Specifications

BrandEaton
ModelXTCE032C10E
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I choose the 32 A inductive or the 45 A resistive rating for my load?

Use the 32 A inductive rating for motor or transformer loads and the 45 A resistive rating for heating or lighting loads.

What does the 208 V AC coil voltage mean once the contactor is installed?

The coil requires a 208 V AC control supply to energise and close the three main power poles.

What does the IEC frame size C and screw-terminal interface cap in practice?

Frame size C with screw terminals fits standard DIN rail or panel mounting and accepts conductors sized for up to 32 A inductive current.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.