We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular contactor with screw terminals and DIN rail mounting, 3.9 by 1.85 inches

Eaton

Eaton XTCE032C10C IEC Magnetic Contactor 32A 480V AC 3P Non-Reversing

SKU CH-HYMX-QM4VQ

IEC magnetic contactor rated 32 A inductive and 45 A resistive at 480 V AC with 1 NO auxiliary, screw terminals and DIN-rail or panel mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 32 A inductive rating handles motor loads
  • 45 A resistive capacity for heating circuits
  • 412/480 V AC coil suits industrial supplies
  • 1 NO auxiliary contact enables status signalling
  • DIN rail and panel mounting simplifies installation

Eaton XTCE032C10C Contactor

The Eaton XTCE032C10C is an IEC magnetic contactor designed for industrial electrical control and automation panels. It handles three-phase motor loads and other inductive circuits up to 32 A at 480 V AC. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring. It is supplied new in transparent housing.

32 A inductive rating at 480 V AC

The decisive specification is the full-load inductive current of 32 A at 480 V AC across three poles. This rating determines whether the contactor can switch your specific motor or heater load without exceeding its thermal limits. The coil operates at 412/480 V AC and the frame size C provides one normally-open auxiliary contact.

For 32 A three-phase control panels

This contactor suits panel builders wiring IEC-style motor starters or lighting banks that require a 32 A non-reversing switch with DIN-rail mounting. It does not suit applications needing reversing operation, higher inductive current ratings, or integrated overload protection. Buyers who want more poles or a different coil voltage should look at other models.

Highlights

  • 32 A inductive rating handles motor loads
  • 45 A resistive capacity for heating circuits
  • 412/480 V AC coil suits industrial supplies
  • 1 NO auxiliary contact enables status signalling
  • DIN rail and panel mounting simplifies installation

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What does the 32 A inductive rating mean for a motor load in my panel?

It means the contactor is rated to switch motor loads drawing up to 32 amps at 480 V AC without exceeding its thermal limits.

What does the 412/480 V AC coil voltage tell me about the control circuit I need?

The coil is designed to operate on control voltages between 412 and 480 V AC, so your control circuit must supply within that range.

Will the 3.9 in height and 1.85 in width fit on a standard DIN rail inside my enclosure?

The contactor measures 3.9 inches high by 1.85 inches wide and is designed for DIN rail or panel mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.