We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular contactor with screw terminals, DIN rail mounting, 3.5 in wide

Eaton

Eaton XTCE032C10A IEC Magnetic Contactor 32A 120V AC 3P Non-Reversing

SKU CH-RPR3-GPF5Q

32 A IEC magnetic contactor with 120 V AC coil, three poles, non-reversing operation and one normally-open auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 32 A inductive rating handles motor loads
  • 120 V AC coil suits standard control circuits
  • Three-pole design switches all phases simultaneously
  • Single NO auxiliary contact provides status feedback
  • DIN rail or panel mounting fits existing panels

Eaton XTCE032C10A IEC Magnetic Contactor

The Eaton XTCE032C10A is a three-pole IEC magnetic contactor rated for 32 A inductive and 45 A resistive loads. It operates on a 110/120 V AC coil and provides one normally open auxiliary contact. The unit is built for DIN rail or panel mounting in industrial control panels.

Coil voltage and auxiliary contact

The 110/120 V AC coil voltage matches common control-circuit supplies in North American panels. The single 1NO auxiliary contact allows simple status feedback or interlock wiring without extra relays. The non-reversing design suits straightforward motor-start or heating-load applications where direction change is not required.

DIN rail or panel mounting with screw terminals

The contactor mounts on standard DIN rail or directly onto a panel using screws. All power and control connections use screw terminals for secure field wiring. The compact frame measures 3.5 in wide and 2 in high, so verify available panel space before installation. Ensure the coil voltage matches the control supply to avoid nuisance tripping or coil damage.

Highlights

  • 32 A inductive rating handles motor loads
  • 120 V AC coil suits standard control circuits
  • Three-pole design switches all phases simultaneously
  • Single NO auxiliary contact provides status feedback
  • DIN rail or panel mounting fits existing panels

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How often will the auxiliary contact need replacement under normal switching cycles?

The contactor includes one normally open auxiliary contact rated for the same 32 A inductive and 45 A resistive loads as the main poles, so its service life matches the primary contacts.

What thermal limit appears first when the contactor carries 32 A continuously?

The 32 A inductive full-load current rating defines the steady-state thermal boundary; exceeding it will cause the coil or contact assembly to overheat before any other parameter is reached.

How much heat does the coil generate when energised at 120 V AC all day?

The 110/120 V AC coil draws only the power needed to hold the armature closed, producing minimal heat that the 2 in by 3.5 in frame dissipates without forced cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.