We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey industrial contactor with screw terminals and single auxiliary contact block

Eaton

Eaton XTCE032C01C Magnetic Contactor 32A 480V AC 1NC

SKU CH-D5ZP-ETVHJ

A 32 A, 480 V AC non-reversing magnetic contactor with one normally-closed auxiliary contact, screw-terminal wiring and UL, CSA, EN 60947 and IEC 60947 certification

  • TypeIndustrial Electrical Controls & Automation
  • Non-reversing design simplifies motor control circuits
  • 32 A rating supports moderate industrial loads
  • 480 V AC coil suits high-voltage panels
  • 1 NC auxiliary contact enables safety interlocks
  • UL, CSA, EN 60947 and IEC 60947 certifications confirm compliance

Industrial Magnetic Contactor 32A 480V AC

This Eaton IEC magnetic contactor is a non-reversing, full-voltage device rated at 32A with a 480V AC coil. It includes one normally closed auxiliary contact and carries UL Listed, CSA Certified, EN 60947 and IEC 60947 certifications. It is built for industrial control panels and motor starter applications.

Compatibility Check Before Ordering

Verify that your control circuit supplies 480V AC for the coil and that the load does not exceed 32A. Ensure the panel can accommodate a non-reversing, three-pole contactor with screw-terminal connections. Confirm that a single 1NC auxiliary contact meets your interlock or signalling requirements.

Integration Into A Build

The unit mounts directly inside an enclosure using screw terminals for both power and control wiring. Its 1NC auxiliary contact can be wired into safety chains or status indication circuits. The certifications listed support compliance in panels built to UL, CSA, EN 60947 or IEC 60947 standards.

Highlights

  • Non-reversing design simplifies motor control circuits
  • 32 A rating supports moderate industrial loads
  • 480 V AC coil suits high-voltage panels
  • 1 NC auxiliary contact enables safety interlocks
  • UL, CSA, EN 60947 and IEC 60947 certifications confirm compliance

Specifications

BrandEATON
TypeIndustrial Electrical Controls & Automation

Questions about this item

What accessories or enclosures come with the XTCE032C01C contactor and what must be purchased separately?

The contactor ships without an enclosure, so a suitable IEC-rated enclosure must be sourced separately. Screw terminals are integral for wiring, and the 1NC auxiliary contact is built in.

How do I decide between the 32 A rating and other available capacities for a 480 V AC coil application?

Choose the 32 A version when the motor or load full-load current is at or below 32 A at 480 V AC; higher-capacity models are required for larger loads.

What does the 32 A rating mean once the contactor is installed in a 480 V AC control circuit?

It indicates the maximum continuous current the main poles can carry at 480 V AC under IEC 60947 conditions, with the coil energised at the same voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.