We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey contactor with transparent cover, screw terminals, DIN rail mount, 3.5 in wide

Eaton

Eaton XTCE025C10T IEC Magnetic Contactor 3 Pole 24V AC 25A

SKU CH-F21C-7A5GA

Three-pole IEC magnetic contactor rated 25 A inductive and 45 A resistive at 24 V AC coil voltage with one normally-open auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC magnetic contactor rated for 25 A inductive loads
  • 24 V AC coil voltage enables low-voltage control circuits
  • Three-pole design switches three-phase motors up to 10 hp at 240 V AC
  • Screw terminals and DIN rail mounting simplify panel installation
  • 45 A resistive rating supports heating and lighting circuits

IEC Magnetic Contactor for 24 V AC Control Circuits

The Eaton XTCE025C10T is a three-pole IEC magnetic contactor rated for 25 A inductive and 45 A resistive loads at 24 V AC coil voltage. It suits panel builders and maintenance engineers who need reliable motor switching in industrial automation panels.

Replaces Worn or Undersized Contactors in Existing

Upgrade when an installed contactor shows contact wear, coil failure or cannot handle the required 10 hp at 240 V AC three-phase duty. The jump is worth it when the application demands a non-reversing unit with a 1 NO auxiliary contact for status feedback.

DIN-Rail or Panel Mount with Screw Terminals

The 3.5 in wide by 1.5 in high frame fits standard DIN rails or direct panel mounting using screw terminals for power and control wiring. Its open-frame design leaves enclosure selection to the integrator while freeing internal space for additional control devices.

Highlights

  • IEC magnetic contactor rated for 25 A inductive loads
  • 24 V AC coil voltage enables low-voltage control circuits
  • Three-pole design switches three-phase motors up to 10 hp at 240 V AC
  • Screw terminals and DIN rail mounting simplify panel installation
  • 45 A resistive rating supports heating and lighting circuits

Specifications

BrandEaton
ModelXTCE025C10T
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What overall width in inches does the contactor occupy on a DIN rail?

The unit is 3.5 in wide and mounts on a standard DIN rail or panel.

How is the 24 V AC coil wired during installation?

Connect the control circuit to the screw terminals marked A1 and A2 on the coil side.

When should the main contacts be replaced?

Replace them when the inductive load current exceeds 25 A or resistive load exceeds 45 A and the contacts show pitting or overheating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.