We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor, DIN rail or panel mount, screw terminals, 3.9 by 1.85 inches

Eaton

Eaton XTCE025C10E Magnetic Contactor 208V AC 3P 25A 1NO

SKU CH-9VBE-HMG98

IEC magnetic contactor for 208 V AC three-phase circuits, rated 25 A inductive and 45 A resistive, with one normally-open auxiliary contact and DIN-rail or panel mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC magnetic contactor rated 25 A inductive load
  • 208 V AC coil voltage for standard control circuits
  • Three-pole non-reversing design switches three-phase loads
  • Compact 3.9 in × 1.85 in footprint fits tight panels
  • DIN-rail or panel mounting with screw-terminal connections

IEC Magnetic Contactor for Industrial Control Panels

This Eaton XTCE025C10E contactor switches three-phase inductive loads up to 25 A and resistive loads up to 45 A. It operates on a 208 V AC coil and mounts on DIN rail or panel for direct integration into automation cabinets. The unit includes one normally-open auxiliary contact for status feedback or interlocking circuits.

Verify Coil Voltage and Mounting Before Ordering

Confirm that your control circuit supplies 208 V AC to match the coil rating. Ensure the enclosure provides space for the 3.9 in height and 1.85 in width dimensions. Check that screw-terminal wiring suits your conductor sizes and that a non-reversing contactor meets the application logic.

Sustained Operation at Rated Current

The contactor is designed to carry 25 A inductive and 45 A resistive continuously within its frame size C construction. Heat dissipation relies on the open mounting style without an integrated enclosure. The IEC-rated contacts maintain performance during extended duty cycles typical of motor-starting and heating-load applications.

Highlights

  • IEC magnetic contactor rated 25 A inductive load
  • 208 V AC coil voltage for standard control circuits
  • Three-pole non-reversing design switches three-phase loads
  • Compact 3.9 in × 1.85 in footprint fits tight panels
  • DIN-rail or panel mounting with screw-terminal connections

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What comes in the box with the XTCE025C10E contactor and do I need to buy anything else?

The contactor ships as a single unit with screw terminals and DIN rail or panel mounting hardware integrated. No separate coil or auxiliary block is required for the listed 1NO configuration.

How do I choose between the inductive and resistive current ratings for my application?

Use the 25 A inductive rating for motor loads and the 45 A resistive rating for heating or lighting circuits; both are at 208 V AC across three poles.

What does the 208 V AC coil voltage mean once the contactor is installed in a control panel?

The coil will pull in and hold reliably when fed 208 V AC from the panel’s control transformer, drawing minimal power while keeping the three main poles closed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.