We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE025C10C transparent IEC contactor, 3.9 in tall, 1.85 in wide, DIN rail mount

Eaton

Eaton XTCE025C10C 480V AC 3P 25A Non-Reversing Contactor

SKU CH-BNA6-274EQ

Three-pole IEC contactor rated 25 A inductive and 45 A resistive at 480 V AC with 1NO auxiliary contact and screw terminals

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor control with 480 V AC coil voltage
  • Handles inductive loads up to 25 A full load current
  • Resistive capacity reaches 45 A for heating circuits
  • Compact 3.9 in height fits tight panel space
  • DIN rail or panel mounting offers flexible installation

IEC Magnetic Contactor for 480 V AC Motors

The Eaton XTCE025C10C is a non-reversing IEC contactor rated for 480 V AC three-phase supplies. It switches inductive loads up to 25 A and resistive loads up to 45 A using a 412/480 V AC coil and one normally-open auxiliary contact.

Check coil voltage and mounting before ordering

Verify that your control circuit supplies 412/480 V AC to match the coil rating. Confirm the panel or DIN rail space can accommodate the 3.9 in height and 1.85 in width, and ensure screw-terminal wiring suits your installation practice.

Suits motor starters needing a single auxiliary

This unit fits applications requiring a compact IEC frame C contactor with one NO auxiliary for status signalling. It is not for reversing circuits, applications demanding additional auxiliary poles, or environments requiring an enclosed NEMA rating.

Highlights

  • Reliable motor control with 480 V AC coil voltage
  • Handles inductive loads up to 25 A full load current
  • Resistive capacity reaches 45 A for heating circuits
  • Compact 3.9 in height fits tight panel space
  • DIN rail or panel mounting offers flexible installation

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What accessories or extra components come with the XTCE025C10C contactor and what must I source separately?

The unit includes the contactor body with one normally-open auxiliary contact and screw terminals for wiring. Coil-suppression modules, additional auxiliary blocks, overload relays, DIN-rail end stops and mounting screws are not included and must be purchased separately if required.

How do I decide between the 412 V and 480 V coil-voltage ratings shown for this contactor?

Choose the rating that matches your control-circuit supply; the coil is rated for both 412 V AC and 480 V AC, so it will operate correctly on either voltage without any hardware change.

What does the 25 A inductive full-load current mean when the contactor is installed in a motor circuit?

It is the maximum inductive load the main poles can switch at 480 V AC in IEC AC-3 duty; a 3-phase motor drawing up to 25 A per phase can be started and stopped within the contactor’s electrical-life rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.