We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE025C01TD magnetic contactor, transparent housing, DIN rail mount, screw terminals

Eaton

Eaton XTCE025C01TD IEC Magnetic Contactor 3 Poles 24V DC 25A

SKU CH-KEKS-10XZ0

IEC magnetic contactor with 3 poles, 24 V DC coil, 25 A inductive rating, screw terminals and DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 3-pole switching handles 25 A inductive loads
  • 24–27 V DC coil voltage suits low-voltage control
  • 45 A resistive rating supports heating circuits
  • Screw terminals on DIN-rail or panel mount simplify wiring
  • 1 NC auxiliary contact provides status feedback

Industrial IEC Contactor 25 A

The Eaton XTCE025C01TD is a three-pole IEC magnetic contactor rated for 25 A inductive and 45 A resistive loads. It operates from a 24 V DC coil with a 24-27 V DC range and includes one normally-closed auxiliary contact. The unit mounts on DIN rail or panel and uses screw terminals for power connections.

Coil Voltage and Contact Limits

The contactor requires a 24-27 V DC supply to energise the coil, so control circuits must stay within that window. Switching capability is defined by the 25 A inductive and 45 A resistive ratings; loads exceeding those currents are outside the device's specified limits. The non-reversing design means it cannot change motor direction without additional components.

Capacity for Motor and Heating Loads

At 25 A inductive rating the contactor comfortably handles typical three-phase motors and similar inductive loads within that current band. The higher 45 A resistive rating provides headroom for heating elements or other resistive circuits. Applications demanding more than 25 A inductive or 45 A resistive current, or requiring reversing operation, fall outside this model's capacity.

Highlights

  • 3-pole switching handles 25 A inductive loads
  • 24–27 V DC coil voltage suits low-voltage control
  • 45 A resistive rating supports heating circuits
  • Screw terminals on DIN-rail or panel mount simplify wiring
  • 1 NC auxiliary contact provides status feedback

Specifications

BrandEaton
ModelXTCE025C01TD
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I choose the 25 A inductive or the 45 A resistive rating for my load?

Use the 25 A inductive rating for motor or transformer loads; the 45 A resistive rating applies only to heating or purely resistive circuits.

What does the 24-27 V DC coil voltage mean once the contactor is installed in a panel?

The coil will operate reliably from any DC supply between 24 V and 27 V, so a standard 24 V DC control bus is suitable without extra regulation.

How does the IEC frame size C and screw-terminal interface limit the wire size I can connect?

Frame size C with screw terminals accepts conductors up to the cross-section defined by the IEC standard for this frame; strip and torque per the installation manual.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.