We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey IEC contactor with DIN rail mounting tabs and screw terminals

Eaton

Eaton XTCE025C01E IEC Magnetic Contactor 208V AC 3P 25A

SKU CH-KM9Y-11M56

IEC magnetic contactor with 3 poles, 25 A inductive rating, 208 V AC coil and DIN-rail or panel mounting

  • TypeIndustrial Electrical Controls & Automation
  • 25 A inductive rating handles motor loads
  • 45 A resistive capacity supports heating circuits
  • 208 V AC coil matches common three-phase supplies
  • 3-pole design switches all lines simultaneously
  • DIN rail and panel mounting fits standard enclosures

Eaton XTCE025C01E Contactor Overview

This Eaton XTCE025C01E is an IEC magnetic contactor rated for 25 A inductive and 45 A resistive loads at 208 V AC. It suits industrial control panels and automation circuits that require a compact three-pole switching device. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring.

Installation Checks Before Ordering

Verify that your control circuit supplies 208 V AC to match the coil voltage and that the enclosure can accommodate a 3.9 in height by 1.85 in width footprint. Confirm the application needs only one normally closed auxiliary contact and a non-reversing contactor style. Ensure the terminal screws accept your wire gauge and that DIN rail or panel mounting hardware is available.

Sustained Load Behaviour

The contactor carries its full 25 A inductive rating continuously when mounted with adequate ventilation around the frame. Screw terminals maintain low resistance over long duty cycles, reducing hot spots during extended operation. The IEC frame size C construction is designed for repeated switching without contact welding under rated inductive conditions.

Highlights

  • 25 A inductive rating handles motor loads
  • 45 A resistive capacity supports heating circuits
  • 208 V AC coil matches common three-phase supplies
  • 3-pole design switches all lines simultaneously
  • DIN rail and panel mounting fits standard enclosures

Specifications

BrandEATON
TypeIndustrial Electrical Controls & Automation

Questions about this item

Does the XTCE025C01E contactor come with the DIN rail clip or mounting screws included?

The unit mounts on DIN rail or panel and uses screw terminals for wiring connections.

Should I select the 25 A inductive or 45 A resistive rating for my motor load?

Use the 25 A inductive rating for motor circuits; the 45 A resistive figure applies to heating loads.

Will the 208 V AC coil operate reliably on a 208 V three-phase supply?

The coil is rated for 208 V AC and the contactor switches three poles at 25 A inductive.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.