We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor, 3 poles, screw terminals, DIN rail mount

Eaton

Eaton XTCE018C10C 3 Pole 480V 18A Contactor

SKU CH-R0Z0-S4K3H

Controls 18 A inductive and 40 A resistive loads at 480 V AC with a 412/480 V coil on DIN rail or panel

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 3-pole design handles 480 V AC for industrial motor control
  • 18 A inductive rating supports reliable switching under load
  • 40 A resistive capacity suits heating and lighting circuits
  • 1 NO auxiliary contact provides status feedback for automation
  • Screw terminals on DIN-rail frame enable fast panel installation

18 A IEC Contactor for Motor Control

The Eaton XTCE018C10C is a three-pole IEC magnetic contactor rated for 18 A inductive and 40 A resistive loads at 480 V AC. It suits panels that switch motors, heating elements or lighting circuits in industrial and commercial installations.

18 A Inductive / 40 A Resistive Headroom

The coil operates at 412/480 V AC and the contactor carries a continuous 18 A inductive rating with 40 A resistive capacity. It runs out of headroom when the load exceeds either current value or when a reversing function is required, as this unit is non-reversing.

DIN-Rail or Panel Mount with Screw Terminals

The contactor mounts on a standard DIN rail or directly on a panel and uses screw terminals for power and control wiring. Its 1.85 in width and 2 in height leave space for adjacent devices, while the single 1NO auxiliary contact provides a status signal without extra relays.

Highlights

  • 3-pole design handles 480 V AC for industrial motor control
  • 18 A inductive rating supports reliable switching under load
  • 40 A resistive capacity suits heating and lighting circuits
  • 1 NO auxiliary contact provides status feedback for automation
  • Screw terminals on DIN-rail frame enable fast panel installation

Specifications

BrandEaton
ModelXTCE018C10C
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Will the 18 A inductive rating on this XTCE018C10C contactor handle the same motor load as my older 10 A unit?

The new contactor carries 18 A inductive and 40 A resistive, so it supports a higher motor load than a 10 A device.

How can I confirm the 412/480 V AC coil is energised correctly after wiring?

Measure coil voltage at the screw terminals; it should read between 412 V and 480 V AC when the control circuit is active.

Does the box include DIN rail clips or must I order them separately for the 1.85 in wide frame?

The contactor mounts on DIN rail or panel directly; no extra clips are required for the 1.85 in frame.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.