We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey IEC contactor with DIN-rail clips and screw terminals

Eaton

Eaton XTCE012B01TD IEC Contactor 24VDC 12A 3P

SKU CH-105C-4WADD

Controls industrial circuits with a 24VDC coil, 12A rating, and three poles plus one normally-closed auxiliary contact

  • Reliable motor switching with 12A rated current
  • Safe low-voltage control via 24VDC coil
  • Space-saving panel or DIN-rail mounting
  • Complete starter assembly with electronic overload relays
  • Three-pole power contacts plus 1NC auxiliary contact

Industrial Control Component

The Eaton XTCE012B01TD is a new IEC magnetic contactor rated for 12A at 24VDC. It serves panel builders and maintenance engineers who need reliable switching in automation cabinets. The three-pole configuration with one normally closed auxiliary contact suits motor starter assemblies and general power control circuits.

Panel And DIN-Rail Mounting

Heavy-duty construction supports both panel and DIN-rail installation for flexible cabinet layouts. Open-frame design allows visual inspection of contact status during commissioning and troubleshooting. The 24VDC coil voltage integrates directly with common PLC output modules and low-voltage control systems.

Compatibility Checks

Verify that your control circuit supplies 24VDC to match the coil rating before ordering. Confirm the 12A contact rating meets the load current of the intended application. Ensure the single normally closed auxiliary contact satisfies your feedback or interlock logic requirements.

Highlights

  • Reliable motor switching with 12A rated current
  • Safe low-voltage control via 24VDC coil
  • Space-saving panel or DIN-rail mounting
  • Complete starter assembly with electronic overload relays
  • Three-pole power contacts plus 1NC auxiliary contact

Specifications

BrandEaton
ModelXTCE012B01TD

Questions about this item

What does the 24VDC coil voltage mean for control circuit compatibility?

The contactor operates from a 24VDC control supply, so the pilot device or PLC output must provide that exact voltage to energise the coil reliably.

How much panel space does the open-frame 3-pole unit require for DIN-rail mounting?

The open design mounts directly on a standard DIN rail; allow clearance for the three power poles and the single normally-closed auxiliary contact block.

Which terminals do I wire for the 12A main contacts versus the 1NC auxiliary?

Connect the three main poles to the load circuit rated at 12A, and use the dedicated 1NC auxiliary terminals for the control-circuit interlock or feedback signal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.