We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey IEC contactor with screw terminals and DIN rail clips

Eaton

Eaton XTCE009B10TD IEC Magnetic Contactor 24V DC 3P 9A

SKU CH-Y4BY-3X0VW

IEC magnetic contactor switches 9 A inductive loads at 24 V DC with a 1 NO auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • IEC magnetic contactor for motor control up to 9 A inductive load
  • 24 V DC coil voltage suits low-voltage control circuits
  • Three-pole main contacts switch three-phase loads up to 3 hp at 240 V AC
  • One normally-open auxiliary contact provides status feedback to control systems
  • Screw terminals on DIN-rail or panel mount frame simplify installation

IEC Magnetic Contactor 24V DC

The Eaton XTCE009B10TD is a three-pole IEC magnetic contactor designed for controlling inductive loads up to 9 A and resistive loads up to 22 A. It operates on a 24V DC coil voltage and provides a single normally open auxiliary contact for status signalling. The unit mounts on DIN rail or panel and uses screw terminals for wiring connections.

Check coil voltage and load ratings

Verify that your control circuit supplies 24V DC to match the contactor coil before ordering. Confirm the motor or heater load does not exceed 9 A inductive or 22 A resistive at the application voltage. Ensure the available mounting space suits a DIN rail or panel installation with screw-terminal access.

Screw terminals and auxiliary contact simplify

The screw terminal connection type allows secure conductor attachment without specialised tooling. One normally open auxiliary contact is included for direct feedback to a PLC or indicator light. The non-reversing design suits straightforward motor starting or heating circuits where direction change is not required.

Highlights

  • IEC magnetic contactor for motor control up to 9 A inductive load
  • 24 V DC coil voltage suits low-voltage control circuits
  • Three-pole main contacts switch three-phase loads up to 3 hp at 240 V AC
  • One normally-open auxiliary contact provides status feedback to control systems
  • Screw terminals on DIN-rail or panel mount frame simplify installation

Specifications

BrandEATON
TypeIndustrial Electrical Controls & Automation

Questions about this item

Does the contactor come with any cables, mounting hardware or auxiliary contacts, or do I need to buy them separately?

The unit is supplied as the contactor only; screw terminals accept your own wiring, DIN-rail or panel mounting hardware is not included, and the single 1NO auxiliary contact is built in.

I see the coil is 24 V DC and the main poles are rated 9 A inductive — is there a higher-current version in the same frame?

This model is the 9 A inductive / 22 A resistive rating in frame size B; other frame sizes carry different current ratings, so choose the frame that matches your load.

What does the 3 hp at 240 V AC three-phase rating mean for my motor circuit?

It indicates the maximum three-phase motor power the contactor can switch at 240 V AC when protected by the correct overload device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.