Eaton
Eaton TRIG8200RD 15A duplex receptacle red
Hospital-grade 15 A duplex receptacle with isolated ground, red impact-resistant face and #14-10 AWG back/side wiring
- Item Count1
- Hospital-grade durability backed by extra heavy-duty construction
- Accepts #14-10 AWG wire for flexible installation
- Isolated ground design reduces electrical interference
- Impact-resistant nylon face withstands tough environments
- Rated 15 A at 125 V for standard circuits
Hospital-grade 15 A duplex receptacle
The Eaton TRIG8200RD is a 15-amp, 125-volt straight-blade duplex receptacle built to hospital-grade standards. Its isolated-ground construction suits healthcare facilities, laboratories and any installation where electrical noise must be kept off the equipment ground. Red colour coding identifies the circuit at a glance. Wiring accepts #14-10 AWG conductors via back and side terminals.
Thermals noise and power draw
The device is a passive wiring accessory with no active components, so it generates no audible noise and draws no power of its own. Brass contacts and screw terminals maintain low resistance under continuous 15 A loading, keeping temperature rise within the limits defined by the hospital-grade listing. No fan, heatsink or external power supply is involved.
Build quality and daily implications
An impact-resistant nylon face and glass-filled nylon base resist cracking from carts, cleaning equipment and repeated plug insertion. The flush-mount format fits standard wall boxes and matches common decorator plates. Red finish remains visible after years of chemical wipe-downs. Isolated-ground terminal requires a dedicated ground conductor, so the installer must pull an extra wire if the existing cable lacks one.
Highlights
- Hospital-grade durability backed by extra heavy-duty construction
- Accepts #14-10 AWG wire for flexible installation
- Isolated ground design reduces electrical interference
- Impact-resistant nylon face withstands tough environments
- Rated 15 A at 125 V for standard circuits
Specifications
| Brand | Eaton |
|---|---|
| Item Count | 1 |
Questions about this item
How do I install the Eaton TRIG8200RD 15A duplex receptacle and what step do people often miss?
Connect #14-10 AWG wires to back and side screw terminals at 125V; the step often missed is securing the isolated ground connection to the brass grounding terminal.
What maintenance or replacement will the TRIG8200RD receptacle need over time?
Inspect the impact-resistant nylon face and glass-filled nylon base for cracks or discoloration; replace the unit if contacts lose tension or the red housing shows heat damage.
What limit appears first on the TRIG8200RD during sustained 15A loads?
The 15A rating and 125V limit define the thermal ceiling; continuous near-full current will heat the brass contacts and nylon base before any other factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



