Eaton
Eaton Pushbutton Flush Black 1NC 30mm 10A 600VAC IP66
A 30 mm flush black pushbutton with 1NC contact rated 10 A at 600 VAC and IP66 protection
- TypeNon Illuminated
- Flush metal button rated IP66 for wet and dusty environments
- 1NC momentary contact rated 10A at 600VAC for reliable switching
- 30mm mounting diameter fits standard industrial panels
- NEMA 1, 2, 3, 3R, 4, 4X, 12, 13 enclosure ratings suit harsh locations
- UL and CSA listed for North American safety compliance
Eaton 30mm Flush Pushbutton — Industrial Control
This Eaton 30mm flush pushbutton provides a momentary 1NC contact for industrial control panels and machinery interfaces. Rated 10A at 600VAC with IP66 protection, it suits applications requiring reliable stop or safety-circuit interruption in harsh environments.
Verify Voltage, Current and Mounting Before Ordering
Confirm your control circuit operates within the 600VAC and 10A ratings and that the panel cut-out accepts a 30mm operator. The pressure-plate terminals require solid or stranded wire compatible with the clamp design, and the NEMA 1, 2, 3, 3R, 4, 4X, 12, 13 ratings must match your enclosure classification.
Replaces Worn or Non-Sealed Momentary Stop Buttons
Upgrade from operators lacking IP66 sealing or NEMA 4X/13 corrosion resistance when exposure to water, oil or dust causes contact failure. The jump is worth it when a metal-head, anodized-aluminium bezel unit with UL and CSA listings is required to meet safety audits or environmental specs.
Highlights
- Flush metal button rated IP66 for wet and dusty environments
- 1NC momentary contact rated 10A at 600VAC for reliable switching
- 30mm mounting diameter fits standard industrial panels
- NEMA 1, 2, 3, 3R, 4, 4X, 12, 13 enclosure ratings suit harsh locations
- UL and CSA listed for North American safety compliance
Specifications
| Brand | Eaton |
|---|---|
| Type | Non Illuminated |
Questions about this item
Does the Eaton 30mm flush pushbutton ship with any mounting hardware or legend plates, or do I need to buy them separately?
The unit is supplied as the operator head and contact block only; mounting hardware and legend plates are not included and must be purchased separately.
Should I choose the 1NC contact version or look for a different contact form for my control circuit?
This model provides a single normally-closed contact rated 10A at 600VAC, suitable for stop or safety-interlock circuits that require a break contact.
What does the IP66 and NEMA 4X rating mean when the button is installed on a machine panel?
IP66 and NEMA 4X certify the operator is dust-tight and protected against powerful water jets, making it suitable for wash-down and outdoor industrial environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
