Eaton
Eaton NGR25681BNAAN Lighted Rocker Switch DPDT 10A 15A 28V IP42 14V LED
DPDT lighted rocker switch with 14V LED indicator, rated 10A at 250VAC and 15A at 28VDC, IP42 sealed
- DPDT On/Off/On control for three-position circuit switching
- 14 V LED indicator shows switch status at a glance
- IP42 rated enclosure resists dust and splashing water
- 15 A at 28 V DC rating handles high-current loads
- UL listed, CSA certified and RoHS compliant for safety assurance
Eaton DPDT Rocker Switch
This Eaton lighted rocker switch provides double-pole double-throw operation with an on/off/on function. It is built for 125 V AC at 15 A, 250 V AC at 10 A, and 28 V DC at 15 A. The 14 V DC incandescent indicator illuminates the actuator for clear status visibility. IP42 rating protects against solid objects and dripping water.
Upgrade From Single-Pole Switches
Install this switch when a circuit requires control of two separate loads from one actuator or when a centre-off position is needed for motor reversal. The jump is worth it if the existing single-pole device cannot handle 15 A at 28 V DC or lacks the illuminated feedback for low-light panels. It does not suit buyers who need a momentary action or a sealed IP67 rating for direct spray environments.
Quick-Connect Panel Mount
Terminals accept 0.250 in quick-connect tabs for fast wiring without soldering. The rectangular mounting hole measures 0.867 in by 1.734 in, so verify panel cut-out dimensions before drilling. Common issues include forcing tabs onto undersized terminals and exceeding the 10 A rating at 250 V AC, which can overheat the contacts.
Highlights
- DPDT On/Off/On control for three-position circuit switching
- 14 V LED indicator shows switch status at a glance
- IP42 rated enclosure resists dust and splashing water
- 15 A at 28 V DC rating handles high-current loads
- UL listed, CSA certified and RoHS compliant for safety assurance
Specifications
| Brand | EATON |
|---|
Questions about this item
What size mounting hole does the Eaton NGR25681BNAAN rocker switch require?
The switch fits a rectangular cut-out of 0.867 in by 1.734 in.
How do I wire the quick-connect tabs on this DPDT switch, and what mistake should I avoid?
Push the 0.250 in quick-connect terminals onto the tabs; the common error is reversing the On/Off/On positions so the centre-off function is lost.
When will the 14 V incandescent indicator lamp need replacement?
The lamp is rated for 14 V DC operation; replace it when illumination dims or fails, as the LED is not separately serviceable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
