Eaton
Eaton M22M-D-R-GB0-K01 22 mm Momentary Push Button 1NC Red IP66 IP67 IP69K
A 22 mm red metal momentary push button with one normally closed contact rated 3 A at 24 V DC and 6 A at 230 V AC, sealed to IP66 IP67 IP69K
- Engine BrandEATON
- Engine Size22 mm
- Momentary flush action for precise control
- 22 mm metal head fits standard panels
- Red colour with white Stop legend for clear identification
- 1NC screw-clamp contacts rated 3 A at 24 V DC and 6 A at 230 V AC
- IP66 IP67 IP69K plus NEMA 1 2 3 4 4X 13 sealing
Industrial momentary push button
The Eaton M22M-D-R-GB0-K01 is a 22 mm flush-mount operator designed for industrial control panels. It provides a single normally-closed contact with a momentary action that returns automatically when released. The red metal head and chrome die-cast aluminium bezel are built for demanding environments.
Suited for safety stop circuits
This unit fits panels that need a clearly marked red stop button with an IP66, IP67 and IP69K seal. It is not suitable for applications that require a normally-open contact, an illuminated head or a maintained latching action. Builders needing multiple contact blocks or a different legend should consider other operators.
Panel-mount with screw-clamp wiring
The operator mounts in a standard 22 mm cut-out and uses screw-clamp terminals for secure connections. Rated at 3 A at 24 V DC and 6 A at 230 V AC under AC-15 and DC-13 duty, it carries NEMA 1, 13, 2, 3, 4, 4X ratings and certifications from Bureau Veritas, CCC, CE, CSA, GOST-R, Lloyd's Register and UL.
Highlights
- Momentary flush action for precise control
- 22 mm metal head fits standard panels
- Red colour with white Stop legend for clear identification
- 1NC screw-clamp contacts rated 3 A at 24 V DC and 6 A at 230 V AC
- IP66 IP67 IP69K plus NEMA 1 2 3 4 4X 13 sealing
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22 mm |
Questions about this item
What size mounting hole does the 22 mm push button need?
The operator fits a standard 22 mm panel cut-out and uses a screw-clamp terminal block for wiring.
Can the 1NC contact rated 6A @ 230V AC switch an older relay coil directly?
Yes, the AC-15 rated 1NC contact handles 6 A at 230 V AC, suitable for typical relay coils.
How do I confirm the IP69K seal is intact after installation?
Verify the flush metal head sits evenly in the bezel and the NEMA 4X / IP66, IP67, IP69K ratings remain effective.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



