Eaton
Eaton M22-K10 Contact Block 1NO 22 mm Black
A 22 mm momentary contact block with one normally-open circuit rated 6 A at 240 V AC, screw terminals and CE, CSA, IEC 60947, UL, VDE 0660 approvals for Eaton M22 push-button operators
- Engine BrandEATON
- Engine Size22 mm
- 1NO momentary contact for reliable switching
- 6 A at 240 V AC handles industrial loads
- Screw terminals give secure wiring
- 22 mm size fits M22 push buttons
- Certified to CE, CSA, IEC 60947, UL and VDE 0660
Contact block for Eaton M22 push buttons
The Eaton M22-K10 is a 22 mm contact block with a single normally open circuit rated at 6 A and 240 V AC. It uses a momentary action and screw terminals for secure wiring. The black housing matches standard M22 operator aesthetics. It carries CE, CSA, IEC 60947, UL and VDE 0660 approvals.
Verify operator series and panel cut-out
Confirm the existing push button is from the Eaton M22 range so the block clips on correctly. The panel must provide a 22 mm cut-out for the operator body. Ensure the control circuit voltage does not exceed 240 V AC and the load stays within the 6 A rating. Check that screw-terminal wiring suits your installation practice.
Replaces worn or missing M22 contact blocks
This block restores switching function when an original M22 contact block has failed or been removed. It upgrades an operator that previously had no electrical contact or only a normally closed circuit. The jump is worth it when the machine uses M22 operators and needs a reliable 1NO momentary contact with the listed safety certifications.
Highlights
- 1NO momentary contact for reliable switching
- 6 A at 240 V AC handles industrial loads
- Screw terminals give secure wiring
- 22 mm size fits M22 push buttons
- Certified to CE, CSA, IEC 60947, UL and VDE 0660
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22 mm |
Questions about this item
What comes in the box with the Eaton M22-K10 contact block and what must I buy separately?
The box contains the contact block itself with screw terminals. You must buy the Eaton M22 push-button operator separately because this block is designed to mount behind it.
How do I choose between the available versions of this contact block?
This specific model is a 1NO momentary block rated 6A at 240V AC with A600/Q300 designation. Select it when your control circuit needs a single normally-open contact that closes only while the button is pressed.
What does the 6A at 240V AC rating mean when the block is installed in a control panel?
It means the contact can reliably switch loads up to 6 amps at 240 volts AC, matching the A600/Q300 NEMA designation for industrial pilot-duty applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
