Eaton
Eaton LS-S11S-LA limit switch roller lever 1NC/1NO 4A 400V AC
A roller-lever limit switch with 1NC/1NO contacts rated 4 A at 400 V AC for position-sensing in machinery
- Reliable position sensing with roller lever actuator
- Handles 4A at 400V AC with 1NC/1NO contacts
- Miniature body fits tight spaces at 1.22 in wide
- NEMA 3, 3S, 4X, 6P rating resists dust and water
- 68 in actuator length suits standard mounting patterns
Eaton LS-S11S-LA Limit Switch
This Eaton LS-S11S-LA is a miniature roller lever limit switch designed for position sensing in industrial machinery. It features a top-mounted plunger actuator with a 1.68 in lever length and a 1NC/1NO contact form. The switch carries an AC rating of 4A at 400V and meets NEMA 3, 3S, 4X and 6P enclosure ratings.
Suits AC control circuits needing a compact sealed
It suits automation systems requiring a small-form-factor switch with high ingress protection for wet or dusty environments. The 1.22 in by 1.32 in body fits tight mounting spaces. Buyers needing DC switching capability or a DC contact rating should look elsewhere as this model is AC rated only.
The 4A 400V AC contact rating decides fit
This single specification determines whether the switch can handle the control circuit load. Verify the application voltage and current do not exceed 400V AC and 4A respectively. The miniature body height of 2.53 in and roller lever actuation complete the mechanical interface.
Highlights
- Reliable position sensing with roller lever actuator
- Handles 4A at 400V AC with 1NC/1NO contacts
- Miniature body fits tight spaces at 1.22 in wide
- NEMA 3, 3S, 4X, 6P rating resists dust and water
- 68 in actuator length suits standard mounting patterns
Specifications
| Brand | EATON |
|---|
Questions about this item
How often should the roller lever actuator be inspected for wear?
Inspect the 1.68 in roller lever regularly; replace it if the lever shows excessive play, cracking or reduced spring return force.
What is the maximum continuous current the contacts can carry without overheating?
The switch is rated for 4 A at 400 V AC; sustained loads at or near this rating will cause the contacts to reach their thermal limit first.
Does the switch generate noticeable heat or noise during all-day operation?
The miniature body (2.53 in high, 1.22 in wide, 1.32 in deep) runs silently; only a slight temperature rise occurs at the rated 4 A load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
