Eaton
Eaton Horn Strobe Red Wall Mount 24V 115CP 99dB 0.170A CN125710
A wall-mounted horn strobe delivers 99 dB audible alerts and 115 candela visual flashes at 24 V DC for indoor and outdoor safety signaling
- TypeTraffic & Parking Lot
- Loud 99 dB horn alerts everyone nearby
- Bright 115 CP xenon strobe gives clear visual warning
- Works indoors and outdoors from -40 to 150 °F
- Low 0.170 A draw at 24 V DC saves power
- Wall-mount design with polycarbonate lens installs fast
Eaton Horn Strobe 24V DC
The Eaton CN125710 is a red wall-mount horn strobe designed for indoor and outdoor safety signalling. It combines a 99 dB audible horn with a 115 candela xenon strobe for clear emergency notification. The unit operates on 24V DC and draws 0.170 A. It suits fire alarm and security systems requiring combined audible and visual alerts.
Installation notes
The device mounts on a wall using a 6 inch diameter housing with a 3 inch depth. Wiring connects to a 24V DC supply capable of 0.170 A per unit. The polycarbonate lens and plastic housing resist weather for outdoor use. Ensure the mounting surface supports the fixture and that wiring follows local codes for notification appliances.
Practical limits
The strobe flashes at 60 flashes per minute with a continuous or pulse sound pattern. Operating temperature ranges from -40 to 150 degrees F. Light output is fixed at 115 candela and sound pressure at 99 dB, so coverage area is limited to the rated output. The 24V DC requirement excludes 12V or mains-voltage systems without a converter.
Highlights
- Loud 99 dB horn alerts everyone nearby
- Bright 115 CP xenon strobe gives clear visual warning
- Works indoors and outdoors from -40 to 150 °F
- Low 0.170 A draw at 24 V DC saves power
- Wall-mount design with polycarbonate lens installs fast
Specifications
| Brand | EATON |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How can I confirm the horn strobe is operating correctly after installation?
Verify the unit produces a continuous or pulsed tone at 99 dB and the xenon strobe flashes 60 times per minute with a clear lens output of 115 CP when powered at 24 V DC.
What components are included and what must be sourced separately?
The horn strobe unit with red plastic housing, polycarbonate lens and wall-mount hardware is supplied; 24 V DC power wiring and any electrical back-box or conduit are not included.
Which version should I choose for a 24 V DC system requiring 115 CP light output and 99 dB sound?
Select the CN125710 model rated for 24 V DC, 0.170 A draw, 115 CP xenon strobe and 99 dB horn, suitable for indoor or outdoor wall mounting from -40 °F to 150 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



