Eaton
Eaton E50SAL 1NC/1NO Limit Switch Body
Limit switch body with 1NO/1NC contacts, rated 10 A at 12 V AC, NEMA 1, 2, 4, 6, 6P, 12, 13 and IP67, operating from -40 to 221 degrees F, CSA, RoHS and UL listed
- Reliable switching with 1NO/1NC contact configuration
- Handles 10 A at 12 V AC for control circuits
- NEMA 1, 2, 4, 6, 6P, 12, 13 enclosures suit harsh environments
- IP67 rating protects against dust and temporary immersion
- Operates from -40 to 221 °F for extreme conditions
Industrial limit switch body
The Eaton E50SAL limit switch body provides a 1NO/1NC contact form rated at 10 A @ 12 V AC for machine-control circuits. It is designed for integration with E50 limit switch assemblies in industrial automation environments.
IP67 thermals and power
The sealed IP67 enclosure operates reliably from -40 degrees to 221 degrees F without active cooling or audible noise. Power draw is limited to the control-circuit load through the 10 A rated contacts.
CSA UL RoHS compliance
The component carries CSA certification, UL Listing and RoHS compliance for regulated installations. No separate actuators, wiring harnesses or configuration software are included with the switch body.
Highlights
- Reliable switching with 1NO/1NC contact configuration
- Handles 10 A at 12 V AC for control circuits
- NEMA 1, 2, 4, 6, 6P, 12, 13 enclosures suit harsh environments
- IP67 rating protects against dust and temporary immersion
- Operates from -40 to 221 °F for extreme conditions
Specifications
| Brand | EATON |
|---|
Questions about this item
How do I install the E50SAL limit switch body onto an E50 limit switch, and what step is often missed?
Mount the body onto the compatible E50 limit switch actuator, then wire the 1NO/1NC contacts to the control circuit; the step often missed is verifying the IP67 seal is fully seated after wiring.
What maintenance or replacement will the E50SAL limit switch body need over time?
The switch body is rated for operation from -40 to 221 degrees F with an IP67 seal; inspect the seal and contact integrity periodically and replace the body if contacts show wear or the enclosure is damaged.
What limit appears first on the E50SAL limit switch body during sustained use at its 10 A, 12 V AC rating?
The contact rating of 10 A at 12 V AC is the primary electrical limit; sustained operation at this load will cause contact wear before the -40 to 221 degrees F temperature range or IP67 protection becomes a factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
