Eaton
Eaton E50KL202 Cutler-Hammer limit switch arm, rod, metal, 5.5 in
Rod lever actuator arm extends 5.5 inches with 1.12-inch width for E50AR16P compatibility
- Rod actuator extends reach for limit-switch triggering
- 5 in arm length suits E50AR16P mounting
- Metal construction resists wear in industrial use
- 12 in width fits standard actuator brackets
- Compatible with E50AR16P for direct replacement
Rod Lever Actuator for E50AR16P
This metal rod lever actuator is designed for Eaton E50 series limit switches. It mounts directly to the E50AR16P switch body to provide mechanical actuation in industrial machinery. The 5.5 in arm length suits applications requiring extended reach. Maintenance teams and machine builders use it to replace worn or damaged original arms.
Replaces worn E50AR1 arms
The E50KL202 serves as a direct replacement for the factory E50AR1 rod arm when the original becomes bent or corroded. Upgrading is worth it when the existing actuator no longer trips the switch reliably or shows visible metal fatigue. It restores original switching precision without modifying the switch mounting or wiring.
Fixed 5.5 in arm limits positioning
The arm length is fixed at 5.5 in with a 1.12 in width, so the actuation point cannot be adjusted along the rod. Installers must position the switch body to match the required trip point. The metal construction resists impact but offers no roller, meaning sliding contact with the cam increases wear compared to roller-equipped alternatives.
Highlights
- Rod actuator extends reach for limit-switch triggering
- 5 in arm length suits E50AR16P mounting
- Metal construction resists wear in industrial use
- 12 in width fits standard actuator brackets
- Compatible with E50AR16P for direct replacement
Specifications
| Brand | EATON |
|---|
Questions about this item
What arm length and width does the E50KL202 rod lever actuator have?
The metal arm measures 5.5 in long and 1.12 in wide, matching the dimensions listed for the E50KL202 rod lever actuator.
Which mounting step is most often missed when fitting the E50KL202 onto an E50AR16P switch body?
Align the actuator's mounting holes with the E50AR16P switch body and secure the supplied fasteners before tightening; skipping this alignment causes binding.
When should the metal rod arm on the E50KL202 be inspected or replaced?
Inspect the 5.5 in metal arm for bending, corrosion or loose mounting after any severe impact or at each scheduled machine maintenance interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
