Eaton
Eaton E50DL1 limit switch head, rotary lever, side, momentary
Side rotary lever limit switch head rated 10 A at 600 V AC with IP67 and NEMA 1, 2, 4, 4X, 6P, 12, 13 protection
- Reliable switching at 600 V AC with 10 A rating
- NEMA 1, 2, 4, 4X, 6P, 12, 13 and IP67 protect against dust and water
- Side rotary lever with 0.63 in arm offers 15 ° operating and 90 ° total travel
- Operates from 10 °F to 200 °F for harsh environments
- UL listed, CSA certified and RoHS compliant for safety assurance
Product identity
The Eaton E50DL1 is a side-mounted rotary lever limit switch head designed for industrial machinery control. It provides momentary actuation with a 0.63 in lever and operates within a 10 to 200 degrees F temperature range. The unit carries NEMA 1, 2, 4, 4X, 6P, 12, 13 and IP67 ratings for harsh environments.
Upgrade context
This head replaces worn or damaged switch heads on compatible E50SA bodies without changing the base wiring. The jump is worth it when the existing lever is bent, the seal has failed, or the actuator travel no longer returns reliably. It restores precise 15 degree operating travel and 6 degree reset travel on the original mounting.
Installation notes
The head mounts directly to the E50SA switch body using the existing hardware. Alignment of the rotary lever to the cam or target is the critical step; incorrect angle causes missed actuation or excessive force. Verify CW/CCW movement matches the application before final tightening.
Highlights
- Reliable switching at 600 V AC with 10 A rating
- NEMA 1, 2, 4, 4X, 6P, 12, 13 and IP67 protect against dust and water
- Side rotary lever with 0.63 in arm offers 15 ° operating and 90 ° total travel
- Operates from 10 °F to 200 °F for harsh environments
- UL listed, CSA certified and RoHS compliant for safety assurance
Specifications
| Brand | EATON |
|---|
Questions about this item
What shaft diameter fits the 0.63 in rotary lever on this E50DL1 head?
The lever is 0.63 in long and operates with 0.7 N force; it mounts on the side of the E50SA body and travels 90 degrees total with 15 degrees operating travel.
How do I wire the side-mounted momentary head to the E50SA base without reversing CW and CCW action?
Align the head so the lever moves both clockwise and counter-clockwise through 15 degrees operating travel and 6 degrees reset travel; the momentary contacts return automatically when force is removed.
Which seals or contacts need replacement after repeated 600V AC, 10 A cycles in an IP67 environment?
The head carries NEMA 1, 2, 4, 4X, 6P, 12, 13 and IP67 ratings with an operating range of 10 to 200 degrees F; no user-serviceable contacts are specified for this head.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
