Eaton
Eaton E34EX708G 30 mm push button 1 NC 1 NO green
30 mm hazardous-location push button with green epoxy-coated metal head, momentary action, 1 NC and 1 NO screw-clamp contacts rated 10 A at 600 V AC and 2.5 A at 250 V DC, NEMA 12, 13, 3, 3R, 4.
- Hazardous-location rated with NEMA 12, 13, 3, 3R, 4, 4X and IP65 protection
- Green 30 mm momentary push button for clear visual identification in industrial settings
- Dual 1 NC and 1 NO contacts provide flexible control circuit options
- 10 A at 600 V AC and 2.5 A at 250 V DC contact rating handles demanding loads
- Screw-clamp terminals ensure secure, vibration-resistant wiring connections
Hazardous Location Push Button
This green Eaton E34EX708G push button is a 30 mm momentary operator rated NEMA 12, 13, 3, 3R, 4, 4X and IP65. It carries one normally closed and one normally open contact rated 10A at 600V AC and 2.5A at 250V DC under A600 and Q300 designations. The epoxy coated head and bezel resist chemicals in harsh industrial settings. Approved to CSA, IEC and UL standards.
Suits panels needing a single corrosion resistant
Control panels in wash down, outdoor or chemical exposure areas will meet NEMA 4X and IP65 requirements with this device. Installations that require multiple operators, pilot lights or maintained action selectors cannot use this single momentary button. Buyers needing a different contact arrangement or a non illuminated mushroom head must choose another model.
Contact rating A600 Q300
The contact block delivers 10A at 600V AC and 2.5A at 250V DC, meeting NEMA A600 and Q300 ratings. This specification decides whether the switch can handle the intended control circuit load. Verify the application voltage and current against these values before purchase.
Highlights
- Hazardous-location rated with NEMA 12, 13, 3, 3R, 4, 4X and IP65 protection
- Green 30 mm momentary push button for clear visual identification in industrial settings
- Dual 1 NC and 1 NO contacts provide flexible control circuit options
- 10 A at 600 V AC and 2.5 A at 250 V DC contact rating handles demanding loads
- Screw-clamp terminals ensure secure, vibration-resistant wiring connections
Specifications
| Brand | EATON |
|---|
Questions about this item
Will the 30 mm cut-out and screw-clamp terminals match my existing panel and wiring?
The operator fits a standard 30 mm panel cut-out and uses screw-clamp terminals for secure wire connections.
How can I verify the green extended button operates correctly after installation?
Press the button and confirm momentary contact change-over between the 1 NC and 1 NO circuits, then release to see both return to their normal states.
Does the package include the epoxy-coated metal bezel and mounting hardware, or must I order them separately?
The bezel is epoxy-coated chemical-resistant metal and is supplied with the operator; mounting hardware is included for panel installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
