Eaton
Eaton C25ANB130T Definite Purpose Magnetic Contactor 24V AC 1 Pole
A 24V AC single-pole definite-purpose magnetic contactor rated for 40 A resistive and 30 A inductive loads with 5 hp at 240V AC
- 24 V AC coil voltage for low-voltage control circuits
- 40 A resistive full-load current handles heavy LED lighting loads
- 30 A inductive full-load current supports motor starting duties
- 5 hp at 240 V AC single-phase rating drives larger equipment
- C25 series frame size A fits compact panel space
Definite Purpose Contactor C25 Series
The Eaton C25ANB130T is a definite purpose magnetic contactor designed for switching LED lighting loads up to 40 A. It operates on a 24V AC coil and provides a single pole configuration suitable for resistive and inductive circuits.
Thermals Noise and Power Draw
The contactor carries a full load current of 40 A resistive and 30 A inductive without a dedicated enclosure. Coil power consumption is limited to the 24V AC control circuit, producing minimal heat and silent operation during normal energised states.
Upgrade Path and Fit
This unit replaces worn single pole contactors in lighting panels rated for 2 hp at 120V AC or 5 hp at 240V AC. The jump is worthwhile when existing hardware cannot handle 40 A LED loads or when a 24V AC control voltage is required.
Highlights
- 24 V AC coil voltage for low-voltage control circuits
- 40 A resistive full-load current handles heavy LED lighting loads
- 30 A inductive full-load current supports motor starting duties
- 5 hp at 240 V AC single-phase rating drives larger equipment
- C25 series frame size A fits compact panel space
Specifications
| Brand | EATON |
|---|
Questions about this item
How do I wire the 24V AC coil and the single-pole power contacts on the C25ANB130T, and what step do installers often miss?
Connect the coil to a 24V AC control circuit and the single pole to the load; the step often missed is confirming the coil voltage matches the control supply before energising.
Which parts of the C25ANB130T will need inspection or replacement after extended service?
The contact tips and the 24V AC coil are the wear items; check for pitting on the tips and coil hum or overheating during routine maintenance.
At what current does the C25ANB130T reach its thermal limit first during continuous operation?
The inductive full-load rating of 30 A is the limiting value for sustained motor or transformer loads; the 40 A resistive rating applies only to non-inductive heating circuits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
