Eaton
Eaton C22-L-G-120 Raised Indicator Light Green 120V AC 22mm
Green 22mm panel indicator light for 120V AC circuits, rated IP67 and IP69K with 100,000-hour LED life
- Engine BrandEATON
- Engine Size22mm Mounting dia
- Green LED indicator rated 120 V AC for clear status
- 22 mm mounting diameter fits standard panel cut-outs
- IP67 and IP69K sealing resists dust and high-pressure wash-down
- 20 mA draw and 100 000 hour life reduce maintenance
- UL listed and CSA certified to EN 60947 and IEC 60947 standards
Industrial indicator light for 120V AC panels
The Eaton C22-L-G-120 is a green LED panel light designed for 22mm mounting holes in industrial control panels. It operates on 120V AC and draws 20 mA, providing clear visual status indication for machinery and electrical systems. The raised profile ensures visibility from multiple angles in demanding environments.
Polycarbonate construction
The flush panel light uses a polycarbonate lens and body rated NEMA 13 and 4X for resistance to water, oil, and coolant ingress. Terminal clamp connections simplify wiring during installation, while the 0.930 in maximum panel thickness accommodates standard industrial enclosures. Round shape fits standard 22mm cut-outs without adapters.
Low heat and long service life at 20 mA
The LED draws minimal current, resulting in negligible heat output and silent operation in normal use. An average rated life of 100,000 hours reduces replacement frequency on production equipment. Compliance with CSA, EN 60947, IEC 60947, and UL Listed standards confirms suitability for regulated industrial applications.
Highlights
- Green LED indicator rated 120 V AC for clear status
- 22 mm mounting diameter fits standard panel cut-outs
- IP67 and IP69K sealing resists dust and high-pressure wash-down
- 20 mA draw and 100 000 hour life reduce maintenance
- UL listed and CSA certified to EN 60947 and IEC 60947 standards
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22mm Mounting dia |
Questions about this item
What voltage does the 120V AC rating support for the indicator light?
The indicator light operates at 120V AC and draws 20 mA of current.
What panel cutout and thickness does the 22mm mounting diameter require?
It fits a 22mm diameter cutout and accommodates panel thickness up to 0.930 in.
How do you wire the terminal clamp connection, and what mistake should be avoided?
Insert stripped wire into the terminal clamp and tighten the screw securely; the common error is leaving the connection loose, which can cause intermittent operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
