Eaton Bussmann
Eaton Bussmann TCFH60N Finger-Safe Fuse Block 31-60A 600V
Finger-safe fuse block accepts Class J/CF fuses from 31 to 60 A at 600 V and mounts on DIN rail or panel with box-lug terminals for 18 to 4 AWG wire
- Finger-safe design prevents accidental contact with live parts
- Accepts 31 to 60 A Class CF fuses at 600 V AC/DC
- Wire range 18 to 4 AWG fits various conductor sizes
- Mounts on DIN rail or panel for flexible installation
- UL Listed, CSA Certified, CE marked and RoHS compliant
Eaton Bussmann TCFH60N Fuse Block
The Eaton Bussmann TCFH60N is a finger-safe fuse block rated for 31 to 60 amps at 600V AC/DC. It accepts Class J and UL Class CF fuses with a 2-1/8 inch length profile. The unit mounts on DIN rail or panel and uses box lug connectors for 18 to 4 AWG wire. It carries CE, CSA, RoHS and UL Listed approvals.
Installers needing single-pole Class J protection
This block suits panels requiring a compact, finger-safe holder for 31-60A Class J or CF fuses with DIN rail or screw mounting. It is not for applications needing multi-pole ganging, visual blown-fuse indication, or fuse classes outside Class J and CF. Buyers needing higher ampacity or different rejection features should look elsewhere.
31-60A Class J/CF fuse compatibility
The decisive specification is the 31 to 60 amp range combined with Class J and UL Class CF fuse acceptance. This defines the exact overcurrent devices the block will safely hold and reject others. Verify your fuse series (FCF or TCF) matches this range before purchase.
Highlights
- Finger-safe design prevents accidental contact with live parts
- Accepts 31 to 60 A Class CF fuses at 600 V AC/DC
- Wire range 18 to 4 AWG fits various conductor sizes
- Mounts on DIN rail or panel for flexible installation
- UL Listed, CSA Certified, CE marked and RoHS compliant
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
Does the finger-safe TCFH60N block run hot or draw power when it carries 60 A continuously?
The block is a passive fuse holder with no active circuitry, so it generates no heat of its own and draws no power; only the fuse inside may warm under load.
What wire gauge and mounting hardware must I already have to install this 600 V block?
You need 18–4 AWG copper wire, a box-lug crimp or screw tool, and either a DIN rail or panel screws for the two mounting styles.
Can I keep my existing Class J or CF fuses and simply snap them into this 31–60 A holder?
Yes — the block accepts UL Class CF and Class J fuses in the FCF and TCF series, so compatible fuses you already own will fit without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
