We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Glass cylinder fuse 20mm by 5mm with metal end caps

Eaton Bussmann

Eaton Bussmann GMA-2.5-R Glass Fuse 2.5A 250V AC 100A 10kA 125V AC 20mm x 5mm

SKU CH-WS3S-Y56FJ

Glass fuse rated 2.5 A at 250 V AC with 100 A interrupt capacity in a 20 mm by 5 mm cylinder

  • Fast-acting protection clears faults quickly
  • 5 A rating matches precise circuit requirements
  • 250 V AC rating suits standard mains voltage
  • 100 A interrupt rating at 250 V AC handles high fault currents
  • 20 mm × 5 mm cylindrical glass body fits standard fuse holders

Glass fuse for 2.5 A circuits

This Eaton Bussmann GMA fuse is a fast-acting glass cartridge rated for 2.5 A at 250 V AC. It suits low-current mains or control circuits in appliances, instrumentation or generator equipment where a cylindrical 20 mm by 5 mm fuse is specified.

Replaces blown GMA or 235 series fuses

It directly substitutes Bussmann GMA, Littelfuse 235 or Mersen GGM parts of the same rating. The upgrade is worthwhile when the original fuse has opened or when a design calls for a 100 A interrupt rating at 250 V AC and 10 kA at 125 V AC.

Fits HTB fuse blocks and similar holders

The non-rejection cylindrical body slides into compatible HTB series fuse blocks or any holder accepting a 20 mm by 5 mm glass fuse. Its single-element construction and CE, CSA, PSE and UL certifications simplify compliance in new builds or maintenance jobs.

Highlights

  • Fast-acting protection clears faults quickly
  • 5 A rating matches precise circuit requirements
  • 250 V AC rating suits standard mains voltage
  • 100 A interrupt rating at 250 V AC handles high fault currents
  • 20 mm × 5 mm cylindrical glass body fits standard fuse holders

Specifications

BrandEATON BUSSMANN

Questions about this item

What fuse holder size accepts this 20 mm by 5 mm glass fuse?

It fits standard 5 mm × 20 mm fuse clips or blocks such as the HTB series.

How is this fast-acting glass fuse installed, and what mistake should be avoided?

Snap it into the fuse clips; do not solder directly to the glass body.

When this fuse blows, what replacement ratings must match?

Replace with a 2.5 A, 250 V AC, fast-acting, 5 mm × 20 mm glass fuse.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.