Eaton Bussmann
Eaton Bussmann GDB-10A Glass Fuse 10A 250V AC 5 PK
Pack of five 10 A fast-acting glass fuses rated 250 V AC with a 35 A interrupt rating
- Fast-acting protection clears faults quickly
- 10 A rating suits 250 V AC circuits
- 35 A interrupt rating handles short-circuit surges
- 20 mm × 5 mm glass body fits standard holders
- Pack of five provides convenient spares
What This Product Is
The Eaton Bussmann GDB-10A is a pack of five glass fuses rated at 10 amps and 250 volts AC. They belong to the GDB series and feature a fast-acting, single-element design with a cylindrical body. These fuses provide overcurrent protection for low-voltage circuits in automotive, generator or general electrical applications.
What To Check Before Ordering
Verify that your equipment calls for a 10 amp, 250 volt AC fuse with a 20 mm by 5 mm cylindrical glass body. Confirm the fuse block or holder accepts a non-rejection type fuse and that the required interrupt rating is satisfied by the 35 amp rating at 250 volts AC. Cross-reference the GDB, S500, 217 or GSB series numbers to ensure compatibility.
How It Fits Into A Build
Each fuse fits standard holders compatible with the HTB fuse block series and similar 5 mm diameter clips. The glass body allows visual inspection of the element after a fault. A fast-acting characteristic limits energy let-through during short circuits. The pack of five provides ready spares for maintenance or multiple circuit positions without needing additional components.
Highlights
- Fast-acting protection clears faults quickly
- 10 A rating suits 250 V AC circuits
- 35 A interrupt rating handles short-circuit surges
- 20 mm × 5 mm glass body fits standard holders
- Pack of five provides convenient spares
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
Does the pack of five GDB-10A fuses include a fuse holder or block, or must I buy one separately?
The pack contains only the five glass fuses. A compatible HTB series fuse block is not included and must be purchased separately if required.
The listing shows equivalent series 217, GDB, GSB and S500 — which one should I select for a direct replacement?
All four series are listed as equivalents for this 10 A, 250 V AC fast-acting glass fuse, so any of them with the same ratings will fit.
The interrupt rating is 35 A at 250 V AC while the box says 100 A at 250 V AC — what does that mean for my circuit?
The fuse carries 10 A continuously and will open safely on a fault current up to 35 A at 250 V AC; the 100 A figure is the supplier’s headline rating, not the tested interrupt capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



