Eaton
Eaton Arrow Hart AH430C9W straight blade plug 30A 250V 3-pole 4-wire grounding female blue IP69K IP67
A 30 A, 250 V three-pole four-wire grounding female plug with IP69K and IP67 sealing accepts #10–#2 AWG conductors via back-wire terminals
- Item Count1
- Rated 30 A 250 V for demanding three-phase loads
- IP69K and IP67 sealing resists high-pressure wash-down and immersion
- Accepts #10–#2 AWG conductors with back-wire terminals
- Three-pole four-wire grounding female ensures safe polarised connection
- Compact 10.75 × 4.813 × 4.75 in nylon housing fits tight panels
Industrial Three-Phase Connector
The Eaton Arrow Hart AH430C9W is a 30-amp, 250-volt straight blade plug built for three-phase power distribution. It accepts #10 to #2 AWG conductors via back-wire termination and provides three-pole, four-wire grounding in a female configuration. The blue nylon housing identifies the voltage rating at a glance for electricians and maintenance teams.
IP69K And IP67 Sealing
The connector carries both IP69K and IP67 ratings, meaning it withstands high-pressure, high-temperature washdowns and temporary immersion. Nickel-plated brass contacts resist corrosion in wet or chemically aggressive environments. This protection level suits food processing, bottling lines and outdoor equipment exposed to harsh cleaning regimes.
Cable Range And Dimensions
The cable entry accommodates diameters from .433 to .985 inches (1.10 to 2.5 cm), securing a wide range of flexible cords. Overall dimensions are 10.75 inches by 4.813 inches by 4.75 inches, allowing the device to fit standard enclosures and panel cutouts. The rugged nylon body resists impact and chemical exposure on the plant floor.
Highlights
- Rated 30 A 250 V for demanding three-phase loads
- IP69K and IP67 sealing resists high-pressure wash-down and immersion
- Accepts #10–#2 AWG conductors with back-wire terminals
- Three-pole four-wire grounding female ensures safe polarised connection
- Compact 10.75 × 4.813 × 4.75 in nylon housing fits tight panels
Specifications
| Brand | Eaton |
|---|---|
| Item Count | 1 |
Questions about this item
What size wire will I need to replace the contacts later?
The connector accepts conductors from #10 AWG up to #2 AWG, so any replacement must fall within that range.
Which rating limits continuous three-phase operation first?
The 30 A, 250 V rating is the electrical ceiling; exceeding it will trip protection before the 5 HP motor load becomes a factor.
How hot or noisy does the nylon housing get during all-day use?
The nylon body and nickel-plated brass contacts run silently; heat rise stays within the 30 A rating, and the IP69K/IP67 seals add no audible noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



