We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue watertight IEC 309 pin-and-sleeve connector, 60A 250V 2-pole 3-wire, IP67 IP69K rated

Eaton

Eaton Arrow Hart AH360C6W 60A 250V 2P3W Watertight Blue IEC 309 Straight Blade Plug

SKU CH-S3QE-RMAMR

A watertight IEC 309 pin-and-sleeve connector rated 60 A, 250 V, 2-pole 3-wire with IP67 and IP69K protection

  • 60 A 250 V rating powers heavy-duty equipment
  • IP67 and IP69K sealing blocks water and high-pressure jets
  • Blue nylon housing improves visibility and resists impact
  • #8–#2 AWG back-wire terminals accept thick conductors
  • IEC 309 360C6W pin-and-sleeve design ensures secure mating

IEC 309 60A 250V Watertight Connector

This Eaton Arrow Hart female connector delivers 60A at 250V in a 2-pole, 3-wire IEC 309 configuration. It suits industrial maintenance teams, event power crews and OEM panel builders who need a dependable blue plug for heavy-duty temporary or permanent power distribution. The IP67 and IP69K ratings confirm it withstands wash-down and immersion in harsh environments.

Nylon housing with nickel-plated brass contacts

The body is moulded from nylon with nickel-plated brass contacts for corrosion resistance. Back-wire terminals accept #8 to #2 AWG phase conductors, #10 to #2 AWG ground and #12 to #16 AWG pilot wires. A cable range of 0.66 to 1.5 inches (1.68 to 3.81 cm) lets the gland seal tightly on common heavy-service cord without adapters.

Replaces worn or non-watertight 60A plugs

It directly replaces damaged 60A 250V pin-and-sleeve devices that lack IP69K protection or have cracked housings. The upgrade is worth it when equipment sees high-pressure cleaning, outdoor weather or frequent connect-disconnect cycles that degrade lesser inlets. Buyers needing a matching inlet, a different voltage keying or a plug instead of a connector should select the corresponding Eaton part.

Highlights

  • 60 A 250 V rating powers heavy-duty equipment
  • IP67 and IP69K sealing blocks water and high-pressure jets
  • Blue nylon housing improves visibility and resists impact
  • #8–#2 AWG back-wire terminals accept thick conductors
  • IEC 309 360C6W pin-and-sleeve design ensures secure mating

Specifications

BrandEaton

Questions about this item

What does the IEC 309 rating on this 60A 250V plug mean for compatibility?

The IEC 309 pin-and-sleeve design ensures it mates only with matching 360C6W inlets or connectors rated for 60A at 250V, preventing cross-connection with other voltages or amperages.

What cable diameter range fits the gland on this blue watertight connector?

The cable gland accepts an outer diameter of .66 to 1.5 inches (1.68 to 3.81 cm), sealing tightly around the jacket to maintain the IP67 and IP69K ratings.

Which AWG conductors go into each terminal of the 2-pole 3-wire body?

Phase terminals take #8 to #2 AWG, the ground terminal takes #10 to #2 AWG, and the pilot terminal takes #12 to #16 AWG; all are back-wired under nickel-plated brass screws.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.