Eaton
Eaton 8004K22N1V2 rocker switch, SPDT, On/Off/On, screw terminals, IP54
SPDT rocker switch with On/Off/On action, screw terminals, 10 A at 250 V AC, 15 A at 125 V AC, 15 A at 28 V DC, and IP54 protection
- SPDT three-position switching for versatile circuit control
- 10 A at 250 V AC rating handles demanding loads
- IP54 sealed construction resists dust and water ingress
- Screw terminals provide secure, tool-friendly wiring
- cRUus, UL E2702 and RoHS compliance meets safety standards
Eaton 8004K22N1V2 rocker switch overview
The Eaton 8004K22N1V2 is a single-pole double-throw rocker switch with an On/Off/On action and screw terminals. It carries AC ratings of 10 A at 250 V and 15 A at 125 V, plus a DC rating of 15 A at 28 V. The switch is rated IP54 and meets cRUus, RoHS, and UL E2702 standards.
Suits panel-mount control circuits needing
This switch fits panels cut to 0.867 in by 1.734 in and is ideal for machinery, motor starters, or lighting circuits that require a maintained centre-off position. It is not suited for momentary-action needs, illuminated panel requirements, or designs that call for a different contact form or mounting footprint.
Screw terminals simplify wiring but demand correct
Wires fasten under the screw terminals with basic hand tools, and the non-illuminated black body avoids glare in bright enclosures. Common issues include stripped threads from over-tightening, loose connections if torque is too low, and water ingress when the panel cut-out exceeds the specified dimensions.
Highlights
- SPDT three-position switching for versatile circuit control
- 10 A at 250 V AC rating handles demanding loads
- IP54 sealed construction resists dust and water ingress
- Screw terminals provide secure, tool-friendly wiring
- cRUus, UL E2702 and RoHS compliance meets safety standards
Specifications
| Brand | EATON |
|---|
Questions about this item
What screw-terminal wire size does the 8004K22N1V2 rocker switch accept?
The switch uses screw terminals suitable for standard hook-up wire; strip each lead, loop it under the terminal screw and tighten securely for a reliable connection.
Can the 8004K22N1V2 replace an older SPDT toggle rated for 10 A at 250 V AC?
Yes, this rocker switch carries the same 10 A @ 250 V AC and 15 A @ 125 V AC ratings plus 15 A @ 28 V DC, so it fits existing panels wired for those loads.
How can I verify the IP54 seal is intact after mounting the 8004K22N1V2?
Inspect the rocker boot for tears, press the actuator through all three positions and confirm smooth return; then apply low-pressure water spray — no ingress means the seal holds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
