We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver toggle switch with screw terminals and threaded mounting stem

Eaton

Eaton 7562K4 DPDT Toggle Switch 10A 250V Screw Terminals

SKU CH-YVGK-7TQPT

A DPDT toggle switch rated 10A at 250V AC with screw terminals and a 0.50 in mounting hole

  • TypeEnclosures
  • Color/FinishSilver
  • DPDT on/off/on gives three switching positions
  • 10 A at 250 V AC handles heavy loads
  • 15 A at 125 V AC covers lower-voltage circuits
  • Screw terminals provide secure wire connections
  • UL recognised and CSA listed for code compliance

Industrial Toggle Switch for Panel Mounting

The Eaton 7562K4 is a double-pole double-throw toggle switch rated at 10A at 250V AC and 15A at 125V AC. It provides an on/off/on switching function with six screw terminal connections. The switch fits a 0.50 inch diameter mounting hole and includes panel mounting hardware for secure installation in electrical enclosures.

Sustained Load Characteristics

Under continuous operation the switch maintains its rated contact capacity of 10 amps at 250 volts AC and 15 amps at 125 volts AC. The screw terminals deliver a firm mechanical connection that resists loosening from vibration or thermal cycling. Silver actuator and stem components provide consistent conductivity throughout the operating cycle without degradation from brief current surges.

Installation Notes and Common Issues

The 0.500 inch stem diameter and thread size match standard 0.50 inch panel cutouts for straightforward mounting. Wiring requires tightening six screw terminals which demands adequate access behind the panel. The 0.469 inch stem length limits maximum panel thickness so verify enclosure depth before installation. Miswiring the DPDT contacts is the most frequent error during assembly.

Highlights

  • DPDT on/off/on gives three switching positions
  • 10 A at 250 V AC handles heavy loads
  • 15 A at 125 V AC covers lower-voltage circuits
  • Screw terminals provide secure wire connections
  • UL recognised and CSA listed for code compliance

Specifications

BrandEATON
TypeEnclosures
Color/FinishSilver

Questions about this item

How much heat does the 10 A 250 V switch generate when it runs continuously?

The DPDT switch is rated for 10 A at 250 V AC and 15 A at 125 V AC; normal operation at these ratings produces only minimal warmth.

What mounting hardware is required to install the 0.50 in diameter panel hole?

Panel-mounting hardware is included; you only need a 0.50 in drilled hole in the enclosure.

Will the screw terminals accept the same wire gauge as my existing 10 A toggle switches?

The screw terminals are designed for standard wiring used with 10 A 250 V AC switches, matching typical installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.