Eaton
Eaton 30 mm Push Button Operator 2NO/2NC Red
A 30 mm red flush push-button operator with 2NO/2NC contacts rated 10A at 600V AC, NEMA 1/2/3/3R/4/4X/12/13 and IP66 protection
- 30 mm flush metal operator fits standard panels
- Momentary action with 2NO/2NC contacts for control circuits
- Red anodised aluminium bezel for high visibility
- Rated 10 A at 600 V AC for industrial loads
- NEMA 4X and IP66 sealing resists dust and water
30 mm Red Push Button Operator
The Eaton 30 mm push button operator provides a momentary, flush-mounted control point for industrial machinery panels. Its red metal head and anodised aluminium bezel suit emergency-stop or critical-function roles where immediate visual identification is required. The unit carries NEMA 1, 2, 3, 3R, 4, 4X, 12 and 13 ratings plus IP66 ingress protection for harsh environments.
2NO/2NC Contact Configuration
The operator integrates a 2NO/2NC contact block rated at 10 A at 600 V AC with an A600/P600 NEMA designation. Screw-clamp terminals accept standard control wiring for secure connections. CSA and UL listings confirm compliance with North American safety standards for industrial control equipment.
Sustained Industrial Duty
Metal construction and the high NEMA/IP ratings allow continuous operation in areas exposed to dust, water jets, oil and corrosive atmospheres. Momentary action returns the contacts to their default state when released, preventing unintended latching during prolonged use. Allen-Bradley panel compatibility simplifies integration into existing control layouts.
Highlights
- 30 mm flush metal operator fits standard panels
- Momentary action with 2NO/2NC contacts for control circuits
- Red anodised aluminium bezel for high visibility
- Rated 10 A at 600 V AC for industrial loads
- NEMA 4X and IP66 sealing resists dust and water
Specifications
| Brand | EATON |
|---|
Questions about this item
What does the 10 A / 600 V AC rating mean for daily use?
The contacts are rated to switch up to 10 A at 600 V AC under the A600/P600 NEMA designation.
How does the screw-clamp terminal affect wiring?
Screw-clamp terminals accept stripped wire and lock it down with a captive screw, giving a secure connection without special crimp tools.
Will the 30 mm metal body fit my existing panel cutout?
It mounts in a standard 30 mm hole and the metal bezel meets NEMA 1, 2, 3, 3R, 4, 4X, 12, 13 and IP66 sealing requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
