We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton steel hydraulic hose fitting, 45-degree elbow, 3/4 inch hose, female JIC swivel

Eaton

Eaton 1AA12FJA12 45° 3/4" Hose 1-1/16-12 JIC Vacuum Accessory

SKU CH-RGWM-Z0TXD MPN 1AA12FJA12

A 45-degree elbow fitting connects 3/4-inch hose to a 1-1/16-12 JIC swivel with a 37-degree thread angle and 3.43-inch length

  • TypePart
  • 45-degree elbow routes hose in tight spaces
  • 3/4 inch hose ID matches standard hydraulic lines
  • Female JIC 1-1/16-12 swivel seals under pressure
  • Steel body with trivalent chromium zinc finish resists corrosion
  • Meets SAE 100R1, SAE 100R2 and GH793 standards

Eaton 45° 3/4" Hose JIC Fitting

This Eaton hydraulic hose fitting provides a 45-degree elbow connection for 3/4-inch inner diameter hose. It features a female JIC swivel thread sized 1-1/16-12 and a crimpable design. The steel construction includes a ROHS trivalent chromium zinc finish.

Suits 45-degree routing on SAE 100R1, 100R2.

This part suits hydraulic assemblies requiring a 45-degree bend on compatible hose types with dash size 12. Builders needing a different elbow angle, thread standard, or hose diameter should select an alternative fitting.

Thread angle 37 degrees

The JIC sealing surface uses a 37-degree flare angle, which determines compatibility with matching male fittings. Verify this angle matches the rest of your hydraulic circuit before ordering.

Highlights

  • 45-degree elbow routes hose in tight spaces
  • 3/4 inch hose ID matches standard hydraulic lines
  • Female JIC 1-1/16-12 swivel seals under pressure
  • Steel body with trivalent chromium zinc finish resists corrosion
  • Meets SAE 100R1, SAE 100R2 and GH793 standards

Specifications

BrandEaton
Model1AA12FJA12
TypePart

Questions about this item

What size hose do I already need for the 3/4 in. I.D. on this Eaton 1AA12FJA12 fitting?

You need a 3/4 inch inside-diameter hydraulic hose, which corresponds to dash size 12, to match the crimpable end of this 45-degree elbow.

Will the 1-1/16-12 JIC thread on this fitting mate with the SAE 100R1 and SAE 100R2 hoses I already run?

Yes, the female JIC swivel thread is built to SAE 100R1, SAE 100R2 and GH793 standards, so it connects directly to those hose assemblies.

How can I confirm the 45-degree elbow is oriented correctly after I crimp it on?

Measure the centre-line angle; it should be 45 degrees with a 37-degree thread angle, and the overall length should be 3.43 inches from end to end.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.