We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel 45-degree elbow fitting, 1/2 inch hose, 7/8-14 JIC female swivel, trivalent chromium zinc finish

Eaton

Eaton 190297-10S 45 Deg 1/2 In Hose 7/8-14 JIC vacuum accessory

SKU CH-JQ0F-GBMT9 MPN 190297-10S

A 45-degree elbow fitting connects 1/2-inch hose to 7/8-14 JIC threads for hydraulic systems

  • TypePart
  • Weight0.4
  • 45-degree elbow enables tight routing
  • 1/2 inch hose I.D. matches system requirements
  • 7/8-14 JIC female swivel ensures secure connection
  • Steel construction with trivalent chromium zinc finish resists corrosion
  • Meets SAE 100R5 and FC 300 standards

Eaton 45° hydraulic hose fitting

This Eaton 190297-10S fitting connects 1/2 inch hydraulic hose using a 7/8-14 JIC female swivel end. The 45-degree elbow shape routes fluid lines around obstructions in mobile and industrial equipment. It is built from steel with a trivalent chromium zinc finish for corrosion resistance.

Replaces worn or damaged reusable ends

Install this fitting when an existing 45-degree JIC end leaks, cracks or strips its threads during maintenance. The reusable design lets technicians swap the fitting without replacing the entire hose assembly. The jump is worth it when the hose tube and cover remain serviceable but the connection end has failed.

Limited to SAE 100R5 and FC 300 hose standards

This fitting is qualified only for hose built to SAE 100R5 and FC 300 specifications in dash size 10. It will not seal correctly on hoses with different reinforcement, cover materials or dimensional tolerances. The 37 and 45 degree thread angle also restricts use to compatible JIC mating ports.

Highlights

  • 45-degree elbow enables tight routing
  • 1/2 inch hose I.D. matches system requirements
  • 7/8-14 JIC female swivel ensures secure connection
  • Steel construction with trivalent chromium zinc finish resists corrosion
  • Meets SAE 100R5 and FC 300 standards

Specifications

BrandEaton
Model190297-10S
TypePart
Weight0.4

Questions about this item

What hose size and thread does the 190297-10S 45-degree elbow accept?

The fitting is made for a 1/2 in. hose I.D. with dash size 10 and a 7/8-14 female JIC swivel thread.

How do I assemble this reusable fitting onto the hose without damaging the 37/45-degree seat?

Lubricate the hose, push it fully onto the nipple, then tighten the swivel nut to the SAE 100R5 torque value; over-tightening distorts the dual-angle seat.

When should I replace the 190297-10S fitting on an SAE 100R5 or FC 300 hose assembly?

Replace it if the zinc finish shows white corrosion, the swivel nut threads gall, or the hose cover cracks near the 3.24 in. fitting length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.