We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel 90-degree hydraulic hose fitting with zinc dicromate finish

Eaton

Eaton 190296-10S hydraulic hose fitting vacuum accessory

SKU CH-AHVP-XNHZ2 MPN 190296-10S

A 90-degree reusable hydraulic hose fitting with 7/8-14 JIC swivel thread for 1/2-inch hose

  • TypePart
  • Weight0.45
  • 90-degree elbow eases routing in tight spaces
  • Female JIC swivel allows quick, leak-free connections
  • Reusable fitting design reduces replacement costs
  • Zinc dicromate finish resists corrosion for longer service life
  • Meets SAE 100R5 and FC 300 standards for hydraulic compatibility

Hydraulic hose fitting specification

This Eaton 190296-10S is a reusable hydraulic hose fitting with a 90 degree elbow shape. It connects to hoses with a 1/2 inch internal diameter using a female JIC swivel thread sized 7/8-14. The steel fitting carries a zinc dicromate finish and meets SAE 100R5 and FC 300 standards for hydraulic service.

Installers needing a 90 degree JIC connection

Technicians assembling or repairing hydraulic lines that require a 90 degree elbow with a 7/8-14 female JIC swivel will find this part matches the specification. Installations requiring a straight fitting, a different thread standard, or a non-reusable crimp style should select an alternative component.

7/8-14 female JIC thread size

The thread size of 7/8-14 is the single specification that determines whether this fitting mates with the corresponding male port or adapter in the hydraulic system. Verifying this exact thread size against the equipment requirements confirms compatibility before purchase.

Highlights

  • 90-degree elbow eases routing in tight spaces
  • Female JIC swivel allows quick, leak-free connections
  • Reusable fitting design reduces replacement costs
  • Zinc dicromate finish resists corrosion for longer service life
  • Meets SAE 100R5 and FC 300 standards for hydraulic compatibility

Specifications

BrandEaton
Model190296-10S
TypePart
Weight0.45

Questions about this item

What does the female JIC 7/8-14 swivel connection cap in practice?

The 37-degree flare seat on the female JIC 7/8-14 swivel seals against the matching male flare, capping hydraulic pressure at the SAE 100R5 and FC 300 rated limits of the hose assembly.

What hose size and fitting shape are required for this 90-degree elbow to mount correctly?

The fitting mounts on 1/2 inch I.D. hose with dash size 10, using the 90-degree elbow shape to route the line at a right angle.

How is this reusable fitting installed, and what step is often done incorrectly?

Slide the socket onto the hose, push the nipple in until the shoulder bottoms out, then tighten the swivel nut; the step often missed is fully seating the nipple before torquing the nut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.